Roberts Gorden BH-200, BH-60, BH-40, BH-150, BH-175, BH-115, BH-100, BH-140 Turbulator Installation

SECTION 6: HEATER INSTALLATION

Step 6.4 Turbulator Installation

			Turbulator must be installed in the last
			standard section of tube. Turbulator is
			not required on the BH-125/150/175/200.
		T
		w	Turbulator Installation
		i
Turbulator		s	Model	Tube Section
		t
Section			BH-40	1st 10' (3 m) Section
			BH-60	2nd 10' (3 m) Section
	Turbulator	Tab	BH-80	2nd 10' (3 m) Section
			BH-100	3rd 10' (3 m) Section
	Adapter
			BH-115	3rd 10' (3 m) Section
			BH-125	N/A
			BH-140	4th 10' (3 m) Section
			BH-150	N/A
			BH-175	N/A
			BH-200	N/A

Turbulator section 2.5'			Pull String
(76.2 cm) (stainless) used in
		Fold tab around outside
BH-40 heaters must be in the
section of turbulator nearest		of tube nearest to the vent to
		hold turbulator in place.
to the burner.
Description	Part Number
Turbulator Adapter 2.5' (76.2 cm)	03051503
Turbulator Section 2' (61 cm)	03051504
Turbulator Section 2.5' (76.2 cm)(Stainless)	03051505
Tube	91409XXX

21 of 59