SECTION 6: HEATER INSTALLATION
Step 6.2 Tube Clamp Package Installation
| Tube Clamp | Bolt |
|
| |
| Flat |
|
| Washer |
|
| Nut |
|
| (Torque 120 in/lb |
|
| 13.56 Nm) |
|
Description | Part Number |
|
Tube Clamp Package | 01318901 |
|
Tube Clamp | 01396801 |
|
Bolt | 97113940 |
|
Flat Washer | 95211600 |
|
Nut | 92113900 |
|
Step 6.3 Coupling and Tube Assembly |
| |
Close coupling | Start slide bar/coupling lock |
A with tab. | B onto coupling. |
| Tab |
| |
|
| Slide Bar/Coupling Lock | |
|
| Wide End | |
|
| Coupling | |
Open | 3" (8 cm) to |
| |
|
| ||
| 4" (10 cm) |
| |
Closed |
|
| |
C Insert tubes into coupling. | D Tighten coupling to join tubes. | ||
|
| Slide Bar/Coupling Lock | |
| Orient coupling so that | Coupling | |
| the impact block is in the |
| |
| 2:00 or 10:00 o’clock |
| |
| positions. | Tube | |
| Tube | ||
|
| ||
Tube | Description | Part Number | |
Coupling | 01329600 | ||
| |||
| Slide Bar/Coupling Lock | 01329700 | |
| Tube | 91409XXX | |
19 of 59