3
load originals and load paper
You can make copies from originals loaded on the glass. You can also print and copy onto a variety of paper types, weights, sizes, and transparency films. It is important, however, that you choose the appropriate paper and make sure that it is loaded correctly and not damaged.
load originals
You can copy or scan any original by placing it on the glass.
Note: Many of the Reduce/Enlarge options, such as Fit to Page or Poster, will not work correctly if the glass and lid backing are not clean. For more information, see clean the glass on page 37 and clean the lid backing on page 37.
1Lift the lid and place the original face down on the glass in the
Tip: If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper on top of the transparency.
Top edge of original
2Close the lid.
load paper
Following is the basic procedure for loading paper. There are specific considerations for loading certain types of paper, transparency film, postcards, and envelopes. After you review this procedure, see tips for loading other types of paper in the paper tray on page 13, load 4 x 6 inch photo paper on page 12, load envelopes on page 11, and load postcards or hagaki cards on page 12.
For information on choosing paper for printing and copying, see recommended papers and papers to avoid in the HP Photo & Imaging Help.
9