chapter 9
notice to all users of the European Economic Area (EEA)
This product is designed to interwork with the analogue telephone networks in the following countries/regions:
German | UK | Netherlands |
|
|
|
France | Spain | Italy |
|
|
|
Belgium | Luxembourg | Sweden |
|
|
|
Austria | Denmark | Ireland |
|
|
|
Norway | Finland | Switzerland |
|
|
|
Greece | Portugal |
|
|
|
|
Network compatibility depends on customer selected settings, which must be reset to use the equipment on a telephone network in a country/region other than where the product was purchased. Contact the vendor or
This equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC (annex II) for
In the event of problems, you should contact your equipment supplier in the first instance.
notice to users of the Irish telephone network
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the unlikely event of problems with loop disconnect dialing, it is recommended to use this equipment only with the DTMF tone dial setting.
notice to users of the German telephone network
The HP 2170 Series products are designed to connect only to the analogue public- switched telephone network (PSTN). Please connect the TAE N telephone connector plug, provided with the hp psc 2170 series, into the wall socket (TAE 6) code N. The
hp psc 2170 series products can be used as a single device and/or in combination (in serial connection) with other approved terminal equipment.
geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb
nach DIN 45635 T. 19
VCCI-2 (Japan)
58 | hp psc 2170 series |