HP 6700 - H7, 6600 - H7 manual Change the answer ring pattern for distinctive ring

Set up and use fax

If you want to configure this setting…		…do this:
Distinctive Ring		1.	Touch right arrow	, and then touch Setup.
Change the answer ring pattern for distinctive ring		2.	Touch Fax Setup, and then touch Advanced Fax
			Setup.
	Note: If you are using a distinctive ring service,
		3.	Touch Distinctive Ring.
	you can use more than one telephone number
		4.	A message appears stating that this setting
	on the same telephone line. You can change
	this setting to enable the printer to determine		should not be changed unless you have multiple
	automatically which ring pattern it should use		phone numbers on the same telephone line.
	for fax calls only.		Touch Yes to continue.
	Tip: You can also use the Ring Pattern Detection	5.	Do one of the following:
	feature in the printer’s control panel to set		• Touch the ring pattern assigned by your
	distinctive ring. With this feature, the printer		telephone company to fax calls.
	recognizes and records the ring pattern of		Or
	an incoming call and, based on this call,
	automatically determines the distinctive ring		• Touch Ring Pattern Detection, and then follow
	pattern assigned by your telephone company to		the instructions on the printer’s control panel.
	fax calls.		Note: If you are using either a PBX phone
			system that has different ring patterns for
			internal and external calls, you must call the fax
			number from an external number.
Fax Speed		1.	Touch right arrow	, and then touch Setup.
Set the fax speed used to communicate between the		2.	Touch Fax Setup, and then touch Advanced Fax
			Setup.
printer and other fax machines when sending and
		3.	Touch Fax Speed.
receiving faxes.
	Note: If you experience problems sending and	4.	Touch to select Fast, Medium, or Slow.
	receiving faxes, try using a lower fax speed.
Fax Error Correction Mode		1.	Touch right arrow	, and then touch Setup.
If the printer detects an error signal during the		2.	Touch Fax Setup, and then touch Advanced Fax
			Setup.
transmission and the error-correction setting is turned
		3.	Touch down arrow	, and then touch Error
on, the printer can request that a portion of the fax
be resent.			Correction Mode.
	Note: If you have problems sending and	4.	Select On or Off.
	receiving faxes, turn off error correction. Also,
	turning off this setting might be useful when you
	are trying to send a fax to another country/
	region or receive a fax from another country/
	region or if you are using a satellite phone
	connection.
Volume		1.	Touch right arrow	, and then touch Setup.
Change the volume of the printer sounds, including		2.	Touch Fax Setup, and then touch Basic Fax
the fax tones.			Setup.
		3.	Touch Fax Sound Volume.
		4.	Touch to select Soft, Loud, or Off.

English

13