Copy documents
The Copy menu on the printer display allows you to easily start a black or color copy and select number of copies. You can also easily change the copy settings, such as changing the paper type and size, adjusting the darkness of the copy, and resizing the copy.
To make black or color copy
1.Load paper in the input tray.
2.Load the original
For more information about loading the original, see Load original on page 24.
3.Select Copy from the Home screen on the printer display, and then press OK to access the Copy menu.
If you do not see Copy on the printer display, press the Home button, and then press the Up and Down buttons until you see Copy.
4.From the Copy menu, select Copies to increase or decrease the number of copies, and then press OK to confirm.
5.Select Start Black Copy or Start Color Copy, and then press OK to make a black or color copy.
More copy features
While in the Copy menu, press the Up and Down buttons to select among settings.
●Paper Type: Selects paper size and paper type. A plain paper setting will print in plain paper normal print quality. A photo paper setting will print in photo paper best quality.
●Resize: Controls the size of the image or document to be copied.
◦Actual Size: Makes a copy that is the same as the size of the original, but the margins of the copied image may be clipped.
◦Fit to Page: Makes a copy that is centered with a white border around the edges. The resized image is either enlarged or reduced to fit the size of the selected output paper.
NOTE: The scanner glass must be clean to make sure the Fit to Page feature works properly.
◦Custom Size: Allows you to increase the size of the image by selecting values greater than 100% or reduce the image size by selecting values less than 100%.
28 Chapter 5 Copy and scan | ENWW |