HP MFP M127fn Fax quality is poor, Turn on the Error Correction setting from the control panel

LCD control panel Touchscreen control panel

1.On the product control panel, press the Setup button.

2.Select Fax Setup, and then select All Faxes.

3.Select Fax Speed, and then select the correct setting.

1.From the Home screen on the product control panel,

touch the Setup button.

2.Select Fax Setup, and then select Advanced Setup.

3.Select Fax Speed, and then select the correct setting.

●Change the fax settings on the control panel to a lower resolution.

NOTE: Higher resolution faxes can take longer to send than lower resolution faxes.

LCD control panel			Touchscreen control panel
1.	On the product control panel, press the Setup	button.	1. From the Home screen on the product control panel,
2.	Select Fax Setup, and then select Fax Send Setup.		touch the Setup	button.

3.Select Def. Resolution, and then select the correct setting.

2.Select Fax Setup, and then select Advanced Setup.

3.Select Fax Resolution, and then select the correct setting.

Fax quality is poor

Fax is blurry or too light.

●Increase fax resolution when sending faxes. Resolution does not affect received faxes.

LCD control panel			Touchscreen control panel
1.	On the product control panel, press the Setup	button.	1. From the Home screen on the product control panel,
2.	Select Fax Setup, and then select Fax Send Setup.		touch the Setup	button.

3.Select Def. Resolution, and then select the correct setting.

2.Select Fax Setup, and then select Advanced Setup.

3.Select Fax Resolution, and then select the correct setting.

NOTE: Increasing resolution slows transmission speed.

●Turn on the Error Correction setting from the control panel.

LCD control panel Touchscreen control panel

1.On the product control panel, press the Setup button.

2.Select Fax Setup, and then select All Faxes.

3.Select Error Correction, and then select On.

1.From the Home screen on the product control panel,

touch the Setup button.

2.Select Service, and then select Fax Service.

3.Select Error Correction, and then select On.

●Check the toner cartridges and replace the cartridge if necessary.

●Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.

ENWW Solve fax problems 111