Change from a USB connection to a wireless network
If you first setup your printer and installed the software with a USB cable, directly connecting the printer to your computer, you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n network that includes a wireless router or access point.
NOTE: The HP ENVY 5530 series only supports connections using 2.4GHz.
Before changing from a USB connection to a wireless network, make sure that:
●The printer is connected to your computer with the USB cable until you are prompted to disconnect the cable.
●The computer is connected to the wireless network that you intend to install the printer on.
Change from a USB connection to a wireless network
1.Depending on your operating system, do one of the following to open the printer software.
●Windows 8: On the Start screen,
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, and then click HP ENVY 5530 series.
2.Select Printer Setup & Software.
3.Select Convert a USB connected printer to wireless. Follow the
58 Chapter 8 Connectivity | ENWW |