service from your telephone company that also uses the
5.Select Back 
twice to return to the Fax Setup menu.
6.Select Basic Setup, and then select Answer Mode.
7.Select Fax/Tel.
With this setting, the product automatically picks up all calls and determines if the call is a voice or fax call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming voice call.
8.Select Back 
twice to return to the Fax Setup menu.
9.Select Advanced Setup, and then select Fax/Tel Ring Time.
10.Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to notify you of an incoming voice call.
Install the HP Fax software (Windows, optional)
With HP Fax software, you can fax electronic documents from a computer if you meet the following requirements:
●The product is connected directly to the computer or to a network to which the computer is connected.
●The product software is installed on the computer.
●The computer operating system is one that this product supports.
NOTE: The HP Fax software that came with the product is the only computer fax program that works with the product. The product is not compatible with fax software produced by other manufacturers.
If the HP Fax software is not installed on your computer, use one of the following methods to install the software.
●Software CD: Insert the software CD that shipped with your HP product into the computer, and then follow the
●Download from the Web: Go to www.hp.com/support, click Drivers & Software, and then follow the
NOTE: When prompted by the software installer, make sure that HP Fax Software is selected as one of the software components to install.
ENWW | Connect and configure the product for fax 45 |