ASRock 960GM-S3 FX manual Panel 960GM-GS3 FX, LAN Port LED Indications

I/O Panel (960GM-GS3 FX)

1	PS/2 Mouse Port (Green)		6	Microphone (Pink)
2	USB 2.0 Ports (USB23)		7	USB 2.0 Ports (USB01)
* 3	RJ-45 Port		8	VGA Port
4	Line	In (Light Blue)	9	COM Port
5	Line	Out (Lime)	10	PS/2 Keyboard Port (Purple)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED

Status	Description
Off	No Activity
Blinking	Data Activity

SPEED LED

Status	Description
Off	10Mbps connection
Orange	100Mbps connection
Green	1Gbps connection

ACT/LINK SPEED

LED LED

LAN Port

*To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system.

For Windows® 7 / VistaTM:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.

3

English

ASRock 960GM-GS3 FX / 960GM-S3 FX Motherboard