Automatic ignition with flame failure safety device
To ignite a burner:
oPress in the control knob of the burner that you wish to light and turn it clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition for the burner will operate.
oYou should hold down the control knob for 20 seconds after the flame on the burner has lit.
oAfter this 20 second interval, turn the control knob to your required setting between the maximum and minimum setting symbols.
oOnce the burner is lit, turn the control knob to your required setting between the maximum and minimum setting symbols.
oTo turn the burner off, turn the control knob fully
oIn case of power failure, the burners can be lit by carefully using a match.
Energy saving tips
BURNERS | PANS | |
| Minimum | Maximum |
| diametre | diametre |
Wok | 220 mm | 260 mm |
Rapid | 180 mm | 260 mm |
140 mm | 260 mm | |
Auxiliary | 120 mm | 140 mm |
oThe diametre of the bottom of the pan should correspond to that of the burner.
19