Baumatic BC391.3TCSS manual Minimum flow adjustment for hob gas taps

Page 32

Minimum flow adjustment for hob gas taps.

All work must be carried out by a GASSAFE registered engineer.

o Light the burner and set the knob at the minimum position.

o Remove the knob from the tap and place a small bladed screwdriver in the centre of the tap shaft.

oUnscrew the adjusting screw, in order to increase the gas flow or tighten the adjusting screw to decrease the gas flow.

oThe correct adjustment is obtained when the flame has a length of about 3 – 4 mm.

o For butane/propane gas, the adjusting screw must be tightly screwed in.

oRefit the control knob.

oMake sure that the flame does not go out by quickly turning from maximum flow to minimum flow. If it does then remove the control knob and make further adjustments to the gas flow, testing it again once the adjustment has been made.

oIMPORTANT: On completion carry out a gas tightness test.

32

Image 32
Contents Page BC391.3TCSS Contents Environmental note Important safety information General InformationDo not Leave the Appliance Unattended Whilst in USE Child SafetyGeneral Safety Page Declaration of conformity CleaningInstallation Specifications Product dimensionsProduct specifications Standard accessoriesRated Voltage Supply ConnectionMax Rated Inputs Mains Supply LeadHob control knobs Control Panel Oven function selector knobOven thermostat control knob Before first use Using your range cookerMinute minder control knob Selecting a cooking function and temperature Selecting an oven functionOven functions Thermostat control knobCooking guidelines Using the minute minderOven operating light Page Shelf positions Image for reference only actual product may differ slightlyTemperature Shelf Approximate Position Cooking time Meat Cooking tableFish PastryUsing the hob top Using the grillAutomatic ignition with flame failure safety device Energy saving tipsMinimum Maximum DiametreCleaning and maintenance Cleaning the hob burners Maintaining the cast iron pan stands Replacing the oven bulbRemoving the oven door for cleaning Removing the inner door glass for cleaning Installation PositioningPage Gas connection Important informationVentilation requirements Gas Safety Installation and Use Regulations Gas adjustment Conversion to LPG for the hob top Max Min Auxiliary Minimum flow adjustment for hob gas taps Important On completion carry out a gas tightness testElectrical connection Replacing the mains supply cable Connecting the mains supply cableSwitch the appliance off at the socket My appliance isn’t working correctly Oven light is not working Am getting condensation in my ovenDo not Attempt to Repair the Appliance Yourself Baumatic Consumables United Kingdom
Related manuals
Manual 1 pages 27.52 Kb