ASRock Version 1.0 manual Floppy Configuration, Super IO Configuration, OnBoard Floppy Controller

3.3.6 Floppy Configuration

In this section, you may configure the type of your floppy drive.

	BIOS SETUP UTILITY
Advanced
Floppy Configuration		Select the type of
		floppy drive
Floppy A	[1.44 MB 312"]	connected to the
		system.
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

3.3.7 Super IO Configuration

BIOS SETUP UTILITY
Advanced
Configure Super IO Chipset		Allow BIOS to Enable
		or Disable Floppy
OnBoard Floppy Controller	[Enabled]	Controller.
Serial Port Address	[3F8 / IRQ4]
Infrared Port Address	[Disabled]
Parallel Port Address	[378]
Parallel Port Mode	[ECP + EPP]
EPP Version	[1.9]
ECP Mode DMA Channel	[DMA3]
Parallel Port IRQ	[IRQ7]
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

OnBoard Floppy Controller

Use this item to enable or disable floppy drive controller.

Serial Port Address

Use this item to set the address for the onboard serial port or disable it. Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4], [2E8 / IRQ3].

Infrared Port Address

Use this item to set the address for the onboard infrared port or disable it. Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. If you plan to use ASRock DeskExpress on this motherboard, please keep this item on [Disabled] option.

36