ASRock p4i65pe manual Acpi Configuration

Page 25

3.3.3 ACPI Configuration

BIOS SETUP UTILITY

Advanced

ACPI Configuration

Suspend To RAM

[Disabled]

Restore on AC / Power Loss

[Power Off]

Ring-In Power On

[Disabled]

PCI Devices Power On

[Disabled]

PS / 2 Keyboard Power On

[Disabled]

RTC Alarm Power On

[Disabled]

Select auto-detect or disable the STR feature.

 

Select Screen

 

Select Item

+-

Change Option

F1

General Help

F9

Load Defaults

F10

Save and Exit

ESC

Exit

v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it.

Restore on AC/Power Loss

Use this item to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the sys- tem starts to boot up when the power recovers.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the power-soft-off mode.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the system.

2 5

Image 25
Contents P4i65PE Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Bios 20.8cm 8.2 Motherboard LayoutTable for Audio Output Connection ASRock 8CH I/OPre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmNotch break Installing a DimmExpansion Slots PCI and AGP Slots Installing an expansion cardPS2USBPWR1 Jumpers SetupIDE2 Onboard Headers and ConnectorsUSB 2.0 Header Chassis Speaker Header Serial ATA Sata Hard Disks Installation Bios Menu Bar Bios Setup UtilityMain Screen Navigation KeysAdvanced Screen CPU Host Frequency CPU ConfigurationSpread Spectrum Ratio StatusChipset Configuration Dram RAS# to CAS# Delay Configure Dram Timing by SPDDram Precharge Delay Dram FrequencyAcpi Configuration OnBoard IDE Operate Mode IDE ConfigurationCombined Mode Option OnBoard IDE ControllerLBA/Large Mode IDE Device ConfigurationPCIPnP Configuration Super IO Configuration Floppy ConfigurationOnBoard Floppy Controller Serial Port AddressECP Mode DMA Channel Parallel Port ModeParallel Port Address EPP VersionHardware Health Event Monitoring Screen USB ConfigurationUSB Controller USB 2.0 SupportBoot Settings Configuration Boot ScreenBoot From Network Boot Up Num-LockSecurity Screen Boot Device PriorityHDD PM-MAXTOR 6L08 Exit Screen Load Optimal DefaultsSave Changes and Exit Discard Changes and ExitSoftware Support