Teka IZ 622, IR 635, IQ 644, IR 604, IR 735 manual Message E3 in the control

Page 32

GB

Fault		Possible cause	Possible solution
ONLY MODELS ...604:
Message E3 in the control

		Inadequate cookware due to	This error message disap-
		its poor magnetic qualities.	pears after eight seconds.
			Otherwise, call Technical
			Support.

When cooking at a level below 9, there will be fluctuations
in the power
		The induction generator of	This is not a defect.
		the cooker turns on and off
		alternately in order to keep
		the chosen cooking level.

If an induction element goes off and the message E2 appears

		Overheating of the electronics.	Excess temperature pro-
			blems during cooking only
			occur in extreme situations
			(an extended period of time
			cooking at maximum power)
			or when installation is ina-
			dequate.
			Verify that installation has
			been done in accordance
			with the indications in the
			instructions manual.

MODELS ...640 AND ...	644

Continuous beeping, touch control disabled and				appears on the displays

	There is an object or some				Remove any object or liquid
	liquid on top of the touch				covering the touch control.
	control.

34

Image 32

Contents Induction Hobs Contents / Inhalt / Table des Matières Introduction / Einführung / Présentation Anmerkungen zum Kochgeschirr für Ihr InduktionskochfeldModel IR 622 / IT Model IT 645 / IR Modell IR 622 / ITModèle IT 645 / IR Modèle IR 622 / ITModel IT 635 / IR DE Modell IT 635 / IRFR Modèle IT 635 / IR Model IR 735 ABModel IR Model IQ Inside circle on the cooking areaModell IR Represents the minimum base diameter Normal conditionsModel IQ Modèle IQ Modell IQ Tions normales dutilisationGB Guide to Using the Instructions Booklet Safety instructionsInstallation Installation with Cutlery DRA- WER or Lower CabinetInstallation with FAN Oven Under the HOB Positioning the hobInstalling the AIR Nozzle Models …604 Fastening the hobFitting holes ModelConnecting the electricity Dimensions and characteristics GB Technical InformationTechnical details ModelControl Panel Elements see figs , 6 Use and MaintenanceBefore starting for First time Switching the Hotplate OFF Switching the Appliance onSwitching the Hotplates on Locking the hob sensors Switching the Appliance OFFSafety Function Timer function Function for keeping a pan hot Models …622Lock Function models Timing a hotplateClock as a countdown timer Disconnecting the clockSwitching off quickly Switching the Countdown Timer onDisconnecting the Countdown Timer Switching OFF QuicklyTouch control user instruc Tions models ...640 Control Panel Elements see figBefore using a hotplate, first check that To turn a hotplate up to full powerSwitching the Hotplates OFF It is selected, i.e. that the corresponStop Function Function for keeping a pan hot Models …622 Adjusting the Programmed Time Power supplied according to Power level selected Switching HEAT-UP onTouch control user instruc Tions for all the models Detecting pans Induction hotplatesPower function Concentrated power Except ...604 model Modifying the Power Level During HEAT-UPSwitching HEAT-UP Function OFF ExampleDisconnection for safety Purposes Overheating safety featureSafety Against Covering Sensors Maximum Operating TimeHEAT-UP Cooking Feature GB TablePower surges Suggestions and recommendationsCleaning and care Recommended Cleaning ProductsLight soiling Heavy soiling Using the scraper When the glass’s colour changesFault Possible cause Possible solution GB If something doesn’t workInduction zones are not heating up To decrease the hotplate gets less hotHotplate switches off and error message E2 is displayed Message U400 and the beeping signalAreas are activated at high power levels Message ER 21 on the control and subsequent disconnectionIf an induction element goes off and the message E2 appears When cooking at a level below 9, there will be fluctuationsMessage E3 in the control