Teka IQ 644, IR 635, IZ 622, IR 604, IR 735 manual Function for keeping a pan hot Models …622

Page 21

with the same settings (power levels, cooking time) as before the pause.

The second button must be pressed within 10 seconds, otherwise the stove will switch off. If cooking is not resumed within 10 minutes of being paused, the stove will again switch off.

Function for keeping a pan hot

(models …622)

Using this function, it is possible to keep food hot in a pan placed on the cooking area.

1 There is a pan on one of the heating ele- ments at a previously selected cooking temperature.

2 It is necessary to touch sensor (4), after which the symbol will appear in the indicator. This is a level between the

0and 1.

To disconnect this function, just touch sen-

sor (4) and change to level 0. This function will only work for a maximum of 120 minutes, after which the hob will dis- connect.

Timer function

This function aids the cooking process, as it is not necessary to be watching: You can set a hob timer and it will turn off automa- tically once the selected time has elapsed.

There are 4 lights surrounding the timer display, showing which of the hobs has a timer set. For example, if you set a timer for the upper left hob, the light on the upper left of the timer display will turn on.

If there are no timers set on any of the hobs (no hob timer light (10) on), the timer can be used as a countdown timer (see

GB

section "Countdown Timer").

On these models you can set the count- down timer and the hob timer from 1 to 99 minutes. All of the hobs can be program- med independently and operate simulta- neously.

Timing a hotplate

1 The hotplate to be timed has to be selec- ted. The corresponding decimal point (11) must be lit.

2 Select a power level of between 1 and 9 using the or sensors (5/4).

3 Touch the clock sensor (7). The deci- mal point (11) of the time display (8) will come on

4 Touch the clock sensor sensor (7) until the time display of the correspon- ding hotplate (10) flash on.

5 Now set a cooking time, between 1 and 99 minutes, using the sensors or (5/4). With the first one you will start with 1, and with the second with 30. Touching both at the same time the value will come back to 00.

The clock will begin to control the time automatically. The control display (10) corresponding to the timed area will remain lit up. If you want to set a time for another hotplate, you have to repeat the 4 and 5 steps.

When the chosen time elapses, the timed area will switch off and the clock will give a series of beeps for several seconds. The time display will show 00 and this will flash on and off, together with the pilot light of the hotplate that has disconnected.

If the hotplate that has been switched off is

23

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Induction Hobs Contents / Inhalt / Table des Matières Anmerkungen zum Kochgeschirr für Ihr Induktionskochfeld Introduction / Einführung / PrésentationModell IR 622 / IT Model IR 622 / IT Model IT 645 / IRModèle IT 645 / IR Modèle IR 622 / ITDE Modell IT 635 / IR Model IT 635 / IRFR Modèle IT 635 / IR Model IR 735 ABInside circle on the cooking area Model IR Model IQModell IR Represents the minimum base diameter Normal conditionsModell IQ Tions normales dutilisation Model IQ Modèle IQSafety instructions GB Guide to Using the Instructions BookletInstallation with Cutlery DRA- WER or Lower Cabinet InstallationInstallation with FAN Oven Under the HOB Positioning the hobFastening the hob Installing the AIR Nozzle Models …604Fitting holes ModelConnecting the electricity GB Technical Information Dimensions and characteristicsTechnical details ModelUse and Maintenance Before starting for First timeControl Panel Elements see figs , 6 Switching the Appliance on Switching the Hotplates onSwitching the Hotplate OFF Switching the Appliance OFF Safety FunctionLocking the hob sensors Function for keeping a pan hot Models …622 Timer functionLock Function models Timing a hotplateDisconnecting the clock Clock as a countdown timerSwitching off quickly Switching the Countdown Timer onSwitching OFF Quickly Disconnecting the Countdown TimerTouch control user instruc Tions models ...640 Control Panel Elements see figTo turn a hotplate up to full power Before using a hotplate, first check thatSwitching the Hotplates OFF It is selected, i.e. that the corresponStop Function Function for keeping a pan hot Models …622 Adjusting the Programmed Time Switching HEAT-UP on Power supplied according to Power level selectedTouch control user instruc Tions for all the models Detecting pans Induction hotplatesModifying the Power Level During HEAT-UP Power function Concentrated power Except ...604 modelSwitching HEAT-UP Function OFF ExampleOverheating safety feature Disconnection for safety PurposesSafety Against Covering Sensors Maximum Operating TimeGB Table HEAT-UP Cooking FeatureSuggestions and recommendations Power surgesRecommended Cleaning Products Cleaning and careLight soiling Heavy soilingWhen the glass’s colour changes Using the scraperGB If something doesn’t work Fault Possible cause Possible solutionInduction zones are not heating up To decrease the hotplate gets less hotMessage U400 and the beeping signal Hotplate switches off and error message E2 is displayedAreas are activated at high power levels Message ER 21 on the control and subsequent disconnectionWhen cooking at a level below 9, there will be fluctuations Message E3 in the controlIf an induction element goes off and the message E2 appears
Top Page Image Contents