Teka IR 604, IR 635, IQ 644, IZ 622, IR 735 manual Use and Maintenance, Before starting for First time

Page 13

Use and Maintenance

Before starting for the

first time

Before connecting the hob to the electrical network, verify that the tension (voltage) and the frequency of the hob correspond to the voltage and frequency indicated on the hob rating plate, which is located on the underside of the hob and in the gua- rantee or, if applicable, on the technical data sheet that should be kept with this manual during the useful life of the appa- ratus.

The apparatus is not designed to be used by people (including children) with reduced physical, mental or sen- sory abilities. It should also not be used by people that do not have experience handling the apparatus or who do not have knowledge of the apparatus, unless they are supervised by a person who is in charge of their safety.

Children should not be allowed to play with the apparatus.

Touch control user instruc- tions (models ...622, ...635,

...645, ...735 AB and ...604)

CONTROL PANEL ELEMENTS (see figs. 5, 6 and 7)

1On/off sensor.

2Hotplate selection sensors and increase power sensor (more).

3Power and/or residual heat displays. Also shows that locking is enabled.

4Reduce power/time sensor (less).

5Sensor lock (model …604).

6Operating sensor "Power" (models …635, …645, …735 AB and …622).

7 Time setting/increase sensor.

8Indicator of selected time (clock).

9Indicator light of the induction element with timer.

GB

Models ...622	fig. 5

Models ...635, ...645 and ...735 AB

	fig. 6

Models ...604	fig. 7

15

Image 13

Contents Induction Hobs Contents / Inhalt / Table des Matières Anmerkungen zum Kochgeschirr für Ihr Induktionskochfeld Introduction / Einführung / PrésentationModell IR 622 / IT Model IR 622 / IT Model IT 645 / IRModèle IT 645 / IR Modèle IR 622 / ITDE Modell IT 635 / IR Model IT 635 / IRFR Modèle IT 635 / IR Model IR 735 ABInside circle on the cooking area Model IR Model IQModell IR Represents the minimum base diameter Normal conditionsModell IQ Tions normales dutilisation Model IQ Modèle IQSafety instructions GB Guide to Using the Instructions BookletInstallation with Cutlery DRA- WER or Lower Cabinet InstallationInstallation with FAN Oven Under the HOB Positioning the hobFastening the hob Installing the AIR Nozzle Models …604Fitting holes ModelConnecting the electricity GB Technical Information Dimensions and characteristicsTechnical details ModelBefore starting for First time Use and MaintenanceControl Panel Elements see figs , 6 Switching the Hotplates on Switching the Appliance onSwitching the Hotplate OFF Safety Function Switching the Appliance OFFLocking the hob sensors Function for keeping a pan hot Models …622 Timer functionLock Function models Timing a hotplateDisconnecting the clock Clock as a countdown timerSwitching off quickly Switching the Countdown Timer onSwitching OFF Quickly Disconnecting the Countdown TimerTouch control user instruc Tions models ...640 Control Panel Elements see figTo turn a hotplate up to full power Before using a hotplate, first check thatSwitching the Hotplates OFF It is selected, i.e. that the corresponStop Function Function for keeping a pan hot Models …622 Adjusting the Programmed Time Switching HEAT-UP on Power supplied according to Power level selectedTouch control user instruc Tions for all the models Detecting pans Induction hotplatesModifying the Power Level During HEAT-UP Power function Concentrated power Except ...604 modelSwitching HEAT-UP Function OFF ExampleOverheating safety feature Disconnection for safety PurposesSafety Against Covering Sensors Maximum Operating TimeGB Table HEAT-UP Cooking FeatureSuggestions and recommendations Power surgesRecommended Cleaning Products Cleaning and careLight soiling Heavy soilingWhen the glass’s colour changes Using the scraperGB If something doesn’t work Fault Possible cause Possible solutionInduction zones are not heating up To decrease the hotplate gets less hotMessage U400 and the beeping signal Hotplate switches off and error message E2 is displayedAreas are activated at high power levels Message ER 21 on the control and subsequent disconnectionMessage E3 in the control When cooking at a level below 9, there will be fluctuationsIf an induction element goes off and the message E2 appears