INDOOR UNIT OPTIONALS
ELECTRICAL HEATER
BEFORE ATTEMPTING TO PERFORM ANY SERVICE OR MAINTENANCE, TURN OFF
THE ELECTRICAL POWER, AND CHECK THAT THE FAN HAS STOPPED
1 To remove the casing, slide them over the rolling sides and remove horizontally
2Remove the filters.
3Remove drain pan.
4Introduce the electrical heater kit rods in the holes of one side of the coil and fix with screws on the other.
5Fix the contactor to the fan deck.
Rolling side
Sides and carcass
Filters 
Contactor
Drain pan
Electric heat
FIG 1
Contactor |
Fan |
LTX 3 |
Electric Heat |
Contactor |
Fan
LTX 5
Electric Heat
NOTE: The safety thermostat must always be at the top of the heater.
26