INSTALLATION INDOOR UNIT
INSTALLATION UNIT
Install the unit in a way that the discharge air would not be direct to persons, differences of temperature can create disturbs.
Keep in mind in the installation of the unit, some ambient can supply electromagnetic radiation that can affect the good function of the unit, follow then the following instruction recommended in this document.
Rolling sides
A
A
To remove the casing, slide them over the rolling sides and remove horizontally (See picture A).
B
Remove the AIR VANES by moving them in the opposite direction of the air sweep motor until they come out, then release the central fixing clip, so that the AIR SWEEP is removed giving better access to the top of the unit (See picture B).
Sides and carcass | Filters |
B |
|
AIR-SWEEP
C
Install the unit with the
Check the strength of the screws to avoid movement of the indoor unit when removing the side and cover panel.. See picture C
D
Always install the filters. If the unit operates without filters there is a risk of damage in the indoor unit from dust..
| OPENING IN FLASE CEILING | |||
|
| LTX 3 |
| LTX 5 |
|
|
| ||
|
|
|
|
|
X |
| 1.321 mm |
| 1.630 mm |
|
|
|
|
|
Y |
| 562 mm |
| 670 mm |
|
|
|
|
|
C
Min. 100 mm.
D
X 
Y 
25