RICE COOKER MICROCOMPUTER_NC00112493_NC00021289 24/04/12 07:33 Page7
• Close the lid.
Note: Always add the rice first otherwise you will have too much water.
•The “Quick” Function is for rice cooking only; preset of time available, with preset time range of between 2 to 15 hours.
•Press “Menu” key under standby status until the “Quick” indicator light turns on, the digital screen will display
•When the inner pot is dry, the cooker will beep once, the digital screen will display “12”, indicating the 12 minutes countdown for automatic simmering.
•After the countdown, the “Keep Warm” indicator light will turn on and the cooker will beep for several times and the digital screen will display “b”. Open the lid; stir the rice with paddle to avoid lumping. The cooked rice can either be served immediately or kept warm for a proper duration – Fig.10.
•This function features short cooking time and is convenient for users who are in a hurry. It is suitable for cooking moderate volume of rice.
•After each use empty and clean the condensation collector.
EN
ZH
TH
MS
Some recommendations
for best results when cooking rice
• Measure out the rice and rinse it thoroughly under running water in a sieve for a long time (except for risotto rice which should not be rinsed). Then place the rice in the bowl together with the corresponding quantity of water.
• Make sure that the rice is well distributed around the whole surface of the bowl, in order to allow even cooking.
• Add salt to your personal taste if required.
• Water may be substituted to stock. If using stock, there is the risks of rice browning a bit in the bottom.
• Do not open the lid during cooking as steam will escape and this will affect the cooking time and the taste.
• On completion of cooking, when the “KEEP WARM” indicate light is on, stir the rice and then leave it in the rice cooker for a few minutes longer in order to get perfect rice with separate grains.
7