Multiquip qp402h manual Operation, Starting the Engine

Page 18

OPERATION

CAUTION

DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed.

STARTING THE ENGINE

1.Place the engine fuel valve lever (See Figure 7) to the ON position.

Figure 7. Engine Fuel Valve Lever (ON Position)

2.Move the throttle lever (See Figure 8) away from the slow position, about 1/3 of the way toward the fast position.

Figure 8. Throttle Lever (1/3 Start Position

3.Place the choke lever (See Figure 9) in the CLOSED position if starting a cold engine.

Figure 9. Engine Choke Lever (Closed)

4.Place the choke lever (See Figure 10) in the OPEN position if starting a warm engine or the temperature is warm.

Figure 10. Engine Choke Lever (Open)

5.Place the engine ON/OFF switch (See Figure 11) in the ON position.

Figure 11. Engine ON/OFF Switch (ON Position)

6.Grasp the starter grip (See Figure 12) and slowly pull it out.The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting.

Figure 12. Starter Grip

7.If the engine has started and the choke lever was moved to the CLOSED position to start the engine, gradually move the choke lever to the OPEN position (Figure 13) as the engine warms up. If the engine has not started repeat steps 1 through 6.

PAGE 18 — QP402H CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #2 (01/29/14)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model QP402H This Manual Must Accompany the Equipment AT ALL TimesProposition 65 Warning Page Table of Contents QP402H Centrifugal PumpParts Ordering Procedures Ordering parts has never been easierSafety Information Safety Messages„ Never open the priming plug when pump General SafetyPump Safety Serious damage to the equipment or engineEngine Safety Fuel SafetyBefore servicing equipment Battery Safety Electric Start only Transporting Safety„ Use well-insulated gloves when picking up the battery Emissions Information Label must remain with the engine for its entire lifeDry Net Weight Specifications PumpSpecifications Pump Model QP402HSpecifications Engine Specifications EnginesGeneral Information Pump Components Drain Plug Remove this plug to drain water from the pumpBasic Engine Initial ServicingMuffler Used to reduce noise and emissions Oil Type Inspection EngineBefore Starting SeasonSetup Starting the Engine Place the engine ON/OFF switch See in the on positionOperation Place the engine fuel valve lever See to the on positionStopping the Engine Always run engine at full speed while pumpingPlace the fuel shut-off lever See in the OFF position Maintenance Pump Pump Vacuum TestPump Vacuum Tester Engine Maintenance Schedule Maintenance EngineEngine Maintenance First EveryWeekly Engine AIR CleanerDaily Engine OILSpark Arrester Cleaning Spark Arrester RemovalStorage Pump StorageSymptom Possible Problem Solution Difficult to start Troubleshooting EngineEngine Troubleshooting Operation not satisfactoryTroubleshooting ENGINE/PUMP Pump TroubleshootingSymptom Possible Problem Solution Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts Qty DescriptionPump Assembly Replaces 94301000109430100020 9430100160Engine Service Parts 28462ZE2W11 17620Z0T30517620Z4H020 17210ZE2822Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

qp402h specifications

The Multiquip QP402H is a versatile and powerful portable generator designed to meet the demanding energy needs of various applications, making it an ideal choice for construction sites, events, and emergency power supply. This generator stands out due to its robust construction, reliability, and advanced technologies that contribute to its performance and efficiency.

One of the standout features of the QP402H is its Honda GX270 engine, known for its durability and fuel efficiency. This air-cooled, four-stroke engine provides a consistent power output, ensuring that users have access to the necessary electricity to run various tools and equipment without interruption. With a tank capacity that allows for extended run times, the generator can operate for several hours without frequent refueling, making it particularly suitable for long workdays or events.

The QP402H delivers an impressive power output of 4,000 watts, making it capable of handling multiple electrical devices simultaneously. This makes it a reliable choice for powering heavy-duty equipment, lighting systems, and other essential machinery. Furthermore, the generator is equipped with multiple 120V outlets, which enhance its versatility and allow users to distribute power efficiently across different tools.

In terms of portability, the Multiquip QP402H does not disappoint. It comes with sturdy wheels and a foldable handle, making it easy to transport from one location to another. This is especially beneficial for contractors and event planners who frequently move equipment to different job sites.

Safety features are another hallmark of the QP402H, including a low oil shutdown system that automatically turns off the engine when oil levels are too low. This prevents potential engine damage and reduces maintenance costs. Additionally, the generator is designed with sound reduction technologies, which minimizes noise output, enabling its use in noise-sensitive environments.

The generator’s construction features a heavy-duty frame that offers protection against rugged conditions, ensuring longevity and reliability in the field. Its user-friendly control panel promotes easy operation, allowing even inexperienced users to operate the generator without difficulty.

In summary, the Multiquip QP402H is an exceptional portable generator characterized by its powerful Honda engine, practical power output, and advanced safety features. Its portable design and robust construction make it an excellent choice for various applications, promising reliability and efficiency wherever power is needed.
Top Page Image Contents