Multiquip qp402h manual Inspection Engine, Before Starting, Oil Type, Season

Page 16

INSPECTION (ENGINE)

CAUTION

DO NOT attempt to operate the pump until the Safety Information, General Information and Inspection sections of this manual have been read and thoroughly understood.

BEFORE STARTING

1.Read safety instructions at the beginning of manual.

2.Clean the pump, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner.

3.Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required.

4.Check carburetor for external dirt and dust. Clean with dry compressed air.

5.Check fastening nuts and bolts for tightness.

Engine Oil Check

1.To check the engine oil level, place the pump on secure level ground with the engine stopped.

2.Remove the filler dipstick from the engine oil filler hole (See Figure 5) and wipe clean.

Figure 5. Engine Oil Dipstick (Removal

3.Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.

4.If the oil level is low (See Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 5). Maximum oil capacity is 1.16 quarts (1.1 liters).

UPPER LIMIT

LOWER LIMIT

Figure 6. Engine Oil DipStick (Oil Level

Table 5. Oil Type

Season

Temperature

Oil Type

Summer

25°C or Higher

SAE 10W-30

Spring/Fall

25°C~10°C

SAE 10W-30/20

Winter

0°C or Lower

SAE 10W-10

DANGER

Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the pump if the engine is hot! or running.

Fuel Check

1.Remove the gasoline cap located on top of fuel tank.

2.Visually inspect to see if the fuel level is low. If fuel is low, replenish with unleaded fuel.

3.When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel immediately!

PAGE 16 — QP402H CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #2 (01/29/14)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model QP402H This Manual Must Accompany the Equipment AT ALL TimesProposition 65 Warning Page Table of Contents QP402H Centrifugal PumpParts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Pump Safety„ Never open the priming plug when pump Serious damage to the equipment or engineFuel Safety Engine SafetyBefore servicing equipment Transporting Safety Battery Safety Electric Start only„ Use well-insulated gloves when picking up the battery Emissions Information Label must remain with the engine for its entire lifeSpecifications Pump Specifications PumpDry Net Weight Model QP402HSpecifications Engine Specifications EnginesGeneral Information Pump Components Drain Plug Remove this plug to drain water from the pumpInitial Servicing Basic EngineMuffler Used to reduce noise and emissions Inspection Engine Before StartingOil Type SeasonSetup Place the engine ON/OFF switch See in the on position OperationStarting the Engine Place the engine fuel valve lever See to the on positionAlways run engine at full speed while pumping Stopping the EnginePlace the fuel shut-off lever See in the OFF position Maintenance Pump Pump Vacuum TestPump Vacuum Tester Maintenance Engine Engine MaintenanceEngine Maintenance Schedule First EveryEngine AIR Cleaner DailyWeekly Engine OILSpark Arrester Cleaning Spark Arrester RemovalStorage Pump StorageTroubleshooting Engine Engine TroubleshootingSymptom Possible Problem Solution Difficult to start Operation not satisfactoryPump Troubleshooting Troubleshooting ENGINE/PUMPSymptom Possible Problem Solution Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts Qty DescriptionPump Assembly 9430100010 9430100020Replaces 9430100160Engine Service Parts 17620Z0T305 17620Z4H02028462ZE2W11 17210ZE2822Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

qp402h specifications

The Multiquip QP402H is a versatile and powerful portable generator designed to meet the demanding energy needs of various applications, making it an ideal choice for construction sites, events, and emergency power supply. This generator stands out due to its robust construction, reliability, and advanced technologies that contribute to its performance and efficiency.

One of the standout features of the QP402H is its Honda GX270 engine, known for its durability and fuel efficiency. This air-cooled, four-stroke engine provides a consistent power output, ensuring that users have access to the necessary electricity to run various tools and equipment without interruption. With a tank capacity that allows for extended run times, the generator can operate for several hours without frequent refueling, making it particularly suitable for long workdays or events.

The QP402H delivers an impressive power output of 4,000 watts, making it capable of handling multiple electrical devices simultaneously. This makes it a reliable choice for powering heavy-duty equipment, lighting systems, and other essential machinery. Furthermore, the generator is equipped with multiple 120V outlets, which enhance its versatility and allow users to distribute power efficiently across different tools.

In terms of portability, the Multiquip QP402H does not disappoint. It comes with sturdy wheels and a foldable handle, making it easy to transport from one location to another. This is especially beneficial for contractors and event planners who frequently move equipment to different job sites.

Safety features are another hallmark of the QP402H, including a low oil shutdown system that automatically turns off the engine when oil levels are too low. This prevents potential engine damage and reduces maintenance costs. Additionally, the generator is designed with sound reduction technologies, which minimizes noise output, enabling its use in noise-sensitive environments.

The generator’s construction features a heavy-duty frame that offers protection against rugged conditions, ensuring longevity and reliability in the field. Its user-friendly control panel promotes easy operation, allowing even inexperienced users to operate the generator without difficulty.

In summary, the Multiquip QP402H is an exceptional portable generator characterized by its powerful Honda engine, practical power output, and advanced safety features. Its portable design and robust construction make it an excellent choice for various applications, promising reliability and efficiency wherever power is needed.
Top Page Image Contents