Multiquip qp402h manual Stopping the Engine, Always run engine at full speed while pumping

Page 19

OPERATION

Figure 13. Choke Lever (Open)

8.Before the pump is placed in to operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a lose component.

9.To begin pumping, place the throttle lever (See Figure 13) in the RUN position. If water is not flowing out of the discharge port, turn off the engine and check for and clear any obstructions within the suction hose.

Figure 14. Throttle Lever (Run)

WARNING

Water must always be flowing through the pump casing while the engine is running. Loss of flow may be the result of a loss of prime, restricted water flow or a dead- head situation. Please note that in such a condition, water in the pump can reach temperatures of 150-200°F in 15 to 20 minutes. This can cause serious burns if this hot water comes into contact with unprotected skin.

Before touching or opening the fill plug or drain plug, first turn off the engine and allow the pump casing to cool to the touch, and then open the pump carefully. Be cautious of any built up water pressure.

CAUTION

ALWAYS run engine at full speed while pumping.

STOPPING THE ENGINE

Normal Shutdown

1.Move the throttle lever to the IDLE position (See Figure 14) and run the engine for three minutes at low speed.

Figure 15. Throttle Lever (Idle)

2.After the engine cools, turn the engine ON/OFF switch to the OFF position (See Figure 15).

Figure 16. Engine ON/OFF Switch (OFF)

3.Place the fuel shut-off lever (See Figure 16) in the OFF position

Figure 17. Fuel Valve Lever (OFF)

Emergency Shutdown

1.Move the throttle lever quickly to the IDLE position, and place the engine ON/OFF switch in the OFF position.

QP402H CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #2 (01/29/14) — PAGE 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents This Manual Must Accompany the Equipment AT ALL Times Model QP402HProposition 65 Warning Page QP402H Centrifugal Pump Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationSerious damage to the equipment or engine General SafetyPump Safety „ Never open the priming plug when pumpFuel Safety Engine SafetyBefore servicing equipment Transporting Safety Battery Safety Electric Start only„ Use well-insulated gloves when picking up the battery Label must remain with the engine for its entire life Emissions InformationModel QP402H Specifications PumpSpecifications Pump Dry Net WeightSpecifications Engines Specifications EngineGeneral Information Drain Plug Remove this plug to drain water from the pump Pump ComponentsInitial Servicing Basic EngineMuffler Used to reduce noise and emissions Season Inspection EngineBefore Starting Oil TypeSetup Place the engine fuel valve lever See to the on position Place the engine ON/OFF switch See in the on positionOperation Starting the EngineAlways run engine at full speed while pumping Stopping the EnginePlace the fuel shut-off lever See in the OFF position Pump Vacuum Test Maintenance PumpPump Vacuum Tester First Every Maintenance EngineEngine Maintenance Engine Maintenance ScheduleEngine OIL Engine AIR CleanerDaily WeeklySpark Arrester Removal Spark Arrester CleaningPump Storage StorageOperation not satisfactory Troubleshooting EngineEngine Troubleshooting Symptom Possible Problem Solution Difficult to startPump Troubleshooting Troubleshooting ENGINE/PUMPSymptom Possible Problem Solution Explanation of Code in Remarks Column Sample Parts ListQty Description Suggested Spare PartsPump Assembly 9430100160 94301000109430100020 ReplacesEngine Service Parts 17210ZE2822 17620Z0T30517620Z4H020 28462ZE2W11Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

qp402h specifications

The Multiquip QP402H is a versatile and powerful portable generator designed to meet the demanding energy needs of various applications, making it an ideal choice for construction sites, events, and emergency power supply. This generator stands out due to its robust construction, reliability, and advanced technologies that contribute to its performance and efficiency.

One of the standout features of the QP402H is its Honda GX270 engine, known for its durability and fuel efficiency. This air-cooled, four-stroke engine provides a consistent power output, ensuring that users have access to the necessary electricity to run various tools and equipment without interruption. With a tank capacity that allows for extended run times, the generator can operate for several hours without frequent refueling, making it particularly suitable for long workdays or events.

The QP402H delivers an impressive power output of 4,000 watts, making it capable of handling multiple electrical devices simultaneously. This makes it a reliable choice for powering heavy-duty equipment, lighting systems, and other essential machinery. Furthermore, the generator is equipped with multiple 120V outlets, which enhance its versatility and allow users to distribute power efficiently across different tools.

In terms of portability, the Multiquip QP402H does not disappoint. It comes with sturdy wheels and a foldable handle, making it easy to transport from one location to another. This is especially beneficial for contractors and event planners who frequently move equipment to different job sites.

Safety features are another hallmark of the QP402H, including a low oil shutdown system that automatically turns off the engine when oil levels are too low. This prevents potential engine damage and reduces maintenance costs. Additionally, the generator is designed with sound reduction technologies, which minimizes noise output, enabling its use in noise-sensitive environments.

The generator’s construction features a heavy-duty frame that offers protection against rugged conditions, ensuring longevity and reliability in the field. Its user-friendly control panel promotes easy operation, allowing even inexperienced users to operate the generator without difficulty.

In summary, the Multiquip QP402H is an exceptional portable generator characterized by its powerful Honda engine, practical power output, and advanced safety features. Its portable design and robust construction make it an excellent choice for various applications, promising reliability and efficiency wherever power is needed.
Top Page Image Contents