Leica ASP300 instruction manual Operation, LEVEL CHECK enabled

Page 50

LEVEL CHECK enabled:

5.Operation

Access the RUN OPTIONS function to display the options selected for the current program.

•	LEVEL CHECK enabled:
↓	The lower level sensor in the retort is acti-
↓	vated.
•	RECIRCULATION enabled:
	During each processing step, the reagent
	is pumped periodically from the bottle to the
	retort and back for continuous and efficient
	mixing of fluid. The first pump step is carried
	out after 16 minutes, all subsequent pump
	steps in 12-minute intervals.
•	PRETEST enabled:
	After starting the program a test run is per-
	formed: the first reagent is pumped into the
	retort and back into the bottle.
•	STIRRER enabled:
	Magnetic stirrer is on.
•	PRINTER enabled:
	At the end of the program run, a full run log
	will be printed out.

Fig. 30

Important!

The options selected will be applied to ALL programs!

All run options can be enabled / disabled during the program run if necessary.

The printer option will be displayed only if a printer has been configured for the instrument.

50	Instruction Manual V 1.3 – 12/2003

Image 50

Contents Advanced Smart Processor Automated vacuum tissue processorLeica ASP300 Page Published by Table of contents Cleaning and maintenance Table of contentsTrouble shooting 7.3.1 Daily cleaning and maintenance1.2 Designated use 1.1Symbols used in this manual and their meaning1.Important notes Chapter 3.5 - “Compatible reagents“2. Safety 2.1 Safety instructions2.Safety 2.2 WarningsWarnings - working with the instrument 2. SafetyWarnings - cleaning and maintenance Protection against excessive vacuum 2.3 Integrated safety devicesOverpressure protection Overcurrent protection3.Instrument components and specifications 3.1Specific instrument options3.2 Overview - instrument components 3.Instrument components and specifications3.Instrument components and specifications Instrument components and accessoriesOverview - Instrument components 3.3 Standard delivery - packing list 3.Instrument components and specificationsInstrument components and specifications 3.4 Technical data3.Instrument components and specifications Retort3.4 Technical Data continued 3.Instrument components and specifications3.5 Compatible reagents 3.Instrument components and specifications4.1 Site requirements 4. Setting up the instrument4.2Electrical connection Moving the instrumentConnecting the instrument to mains 4. Setting up the instrument4.Setting up the instrument 4.3 Installing the accessoriesPrinter optional 4.4 Setting up the data connections4.Setting up the instrument Lift off the instrument console flap4.5 Alarm functions 4. Setting up the instrument4.6 Switching the instrument on 4.Setting up the instrument4.Setting up the instrument 2 - Access INSTALLATION menu4.Setting up the instrument Button symbols4.7.2. Access control 4.Setting up the instrument4.Setting up the instrument →→ →→ →→ →→ → → → →→→→ →→ 5.1.1Fill/drain reagents other than wax 5. Operation5.1 Reagent handling 5.Operation Fill / drain reagents →5.Operation 5.1.2 Changing the wax→ + → Filling with wax pellets → → 5.OperationAdding molten paraffin 5. Operation5.Operation 5.2 Setting up the instrument parameters→ 5.2.1 System setup 5. Operation Program Options5.Operation Security5.2.2 Editing the reagent list 5. Operation5. Operation Entering / modifying reagent thresholds↓ ↓ ↓ 5.Operation5.2.3Viewing the program list 5.Operation5.2.4 Adding and/or modifying programs 5. Operation5.Operation 5. Operation Editing program steps continued5.2.5Favorites maximum of 5 programs 5.Operation5.Operation 5.2.6 Editing the stations 5.Operation5. Operation 5.3 Programs 5.OperationEnter the day when you want the program finished 5.3.1 Editing a selected programEDIT to access the Edit Program screen 5. OperationLEVEL CHECK enabled 5.Operation5.3.2 Starting a program 5. Operation5.4Reagent status → 5.Operation5.5 System Monitor → → 5. Operation5.6 On-linehelp 5.Operation5.7Configuring a printer optional →→ 5.Operation6.1 General 6.Trouble shooting→ 6.2 Power failure 6.Trouble shooting 6.3Trouble shooting →6.4 Typical fill or drain problems 6.Trouble shooting7.Cleaning and maintenance 7.1Clean programs →→ 7.1.1 Retort clean programsEditing steps 7.Cleaning and maintenance7. Cleaning and maintenance 7.1.2 Wax clean programs7.1.3Smart clean → 7.Cleaning and maintenance7.2 General cleaning steps 7. Cleaning and maintenanceExchanging the activated carbon filter 7.Cleaning and maintenanceDraining the condensate bottle Exchange the filter as shown in Fig7.3.1Daily cleaning and maintenance 7. Cleaning and maintenance7.3.2Periodic cleaning and maintenance 7.Cleaning and maintenance7.4 Preventative maintenance schedule 7. Cleaning and maintenance7. Cleaning and maintenance Maintenance activityTechnical service information 8. Warranty and serviceWarranty Decommissioning and disposal