4.Setting up the instrument
9
8
7
10
11
12
Fig. 6
4.4 Setting up the data connections
Printer (optional)
•Lift off the instrument console flap (12).
•Connect the printer to the printer port (7) via a standard Centronics cable (refer Fig. 6).
Other connections
•For additional data transfer and storage the instrument console is equipped with a stan- dard 1.44 MB floppy drive (10) for 3.5“ dis- kettes and with an RS 232 serial port (11) .
Only instruments which satisfy the re- quirements for SELV circuits may be connected to interfaces (7), (8), (9) and (11).
22 | Instruction Manual V 1.3 – 12/2003 |