GE ASQ28 owner manual Safety Precautions, Do not use an adapter plug with this appliance

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Installation Instructions Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

■Turn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip

or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Air Conditioners Write the model and serial numbers here Model # Serial #Safety Precautions Do not use an adapter plug with this applianceUSE of Extension CORDS-115-Volt models only Ge.comRemote Control About the controls on the air conditionerFan Mode Power Outage Recovery FeatureCool Mode Vent ControlGrille and Case Care and cleaning of the air conditionerHow to Insert the Batteries Outdoor CoilsTools YOU will Need Before YOU BeginElectrical Requirements Window Installation Instructions Parts IncludedPrepare the Window Window RequirementsStorm Window Requirements Remove the Front Grille if AttachedRemove the AIR Conditioner from the Case Prepare the CaseInstall the Case Install the Case in the WindowInstall the Security Bracket and the Foam TOP Window Gasket Install the AIR Conditioner in the CaseThrough-the-Wall Installation Instructions-Optional Finish the Wall OpeningTroubleshooting Tips… Normal Operating SoundsGeneral Electric Company Consumer Product Ownership Registration GE Will Replace GE Air Conditioner WarrantyWhat Is Not Covered Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design StudioAcondicionadores de Aire Instrucciones de Seguridad ¡ADVERTENCIA InstruccionesAcerca de los controles en el acondicionador de aire Control remotoModo de FAN Ventilador Función de recuperación de pérdida de energíaModo Cool Frio Control de la ventilaciónCuidado y limpieza del acondicionador de aire Precaución no Opere elAntes DE Iniciar Requisitos ElectricosHerramientas QUE Usted Necesitará Partes IncluidasPrepare LA Ventana Requisitos Para LA VentanaRequisitos DE UNA Ventana DE Tormentas Retire LA Parrilla Frontal SI Está PegadaPrepare LA Caja Retire EL Acondicionador DE Aire DE LA CajaInstale LA Caja EN LA Ventana Instale LA CajaDE LA Ventana Instale EL Acondicionador DE Aire EN LA CajaInstrucciones de instalación a través de la pared-opcional ImportanteTermine LA Abertura EN LA Pared Solucionar problemas Sonidos de operación normales Lo que no está cubierto Garantía de su acondicionador de aire de GEGE reemplazará Un añoGarantías ampliadas Apoyo al Consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesorios
Top Page Image Contents