Check Operation and Adjustment

Note: When first turned on or when switching modes wait 30 seconds.

Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off.

Locate the RANGE control and ON-TIME control on the motion sensor:

•TheRANGEcontrolandON-TIMEcontrolarelocatedonthebottom of the motion sensor. Using your fingernails or a small, flat-head screwdriver, gently pry the cover until it opens.

1.Check Operation. Set the ON-TIME control to TEST mode. Walk in front of motion sensor. The LED indicator light should flash when motion is detected (see illustration for location of LED light).

2.Adjust Motion Sensor. Turn the RANGE control to the mid posi- tion and ON-TIME control to the TEST position. Walk through coverage area noting where you are when the LED begins to flash. Loosen the clamp screw and move the motion sensor to change the coverage area. Tighten clamp screw when finished.

Do not overtighten clamp screw.

3.Adjust RANGE Control. To increase sensitivity, turn the RANGE control toward MAX. To decrease sensitivity, turn the RANGE control toward MIN. Note: If the RANGE is set too high, false triggering may result in some environments.

Note: When using test mode to check operation in the day time:

A.Set the DETECT control switch to DAY/NIGHT and

B.Set the ON-TIME control to TEST.

			Range
ON-TIME	ON-TIME	RANGE	Control
Control	(MINUTES)	MAX	MIN
Control
	5 1 TEST

LED

Indicator

180° Motion Sensor Controls

4.Set ON-TIME Control. Determine the amount of time you want the connected device to stay on after motion is detected (1 or 5 minutes). Slide the ON-TIME control to the corresponding setting.

DualBrite® Dimmer Control

(240° Motion Sensor Only)

Light comes on half power for selected time after dusk (Off, 3 or 6 hours, until dawn). When motion is sensed, the light turns on full power for the selected ON-TIME (1 or 5 minutes) then returns to accent mode.

1.Select amount of time desired for accent lighting (DualBrite® control).

•Off

•3 Hours

•6 Hours

•Dusk to Dawn

IMPORTANT: Avoid Aiming Motion Sensor At:

•Objects that change temperature rapidly, such as heating vents, fans, and air conditioners. These air sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light colored objects reflecting light may trigger the shut-off feature. Do not point other lights at motion sensor.

LED Indicator

			Range
		RANGE	Control
	MAX	MIN
DualBrite®	DUSKTO 6 3 OFF	TEST 1 5	ON-TIME
DualBrite®	DAWN HRS	(MINS)	ON-TIME
Control	DUALBRITE™	ON-TIME	Control

240° Motion Sensor Controls

598-1347-00

598-1347-00 specifications

The Heath Zenith 598-1347-00 is a highly regarded outdoor motion-activated light fixture designed to enhance security and convenience around residential properties. This device combines practicality with advanced technology to address the needs of homeowners seeking efficient lighting solutions.

One of the main features of the Heath Zenith 598-1347-00 is its powerful motion sensor, which detects movement within a specified range. The sensor has an adjustable sensitivity setting, allowing users to tailor its responsiveness to their specific environment. This means the light will activate when it detects motion within its coverage area, which significantly improves security by illuminating the surroundings when unexpected movement occurs.

The fixture is also equipped with a state-of-the-art LED light source. LEDs are known for their energy efficiency, consuming less power while providing bright illumination. This characteristic not only reduces electricity bills but also contributes to the longevity of the light fixture itself, as LEDs typically last significantly longer than traditional bulbs. The Heath Zenith 598-1347-00 can provide up to 1200 lumens of brightness, ensuring a well-lit area for enhanced visibility at night.

In terms of design, the Heath Zenith 598-1347-00 boasts a rugged and weather-resistant construction, making it suitable for various outdoor settings. It is designed to withstand the elements, with a durable housing that protects the internal components from moisture and corrosion. This ensures the fixture will maintain its functionality over time, regardless of the weather conditions it faces.

Another notable characteristic of this outdoor light is the adjustable timer and photocell feature. The timer allows homeowners to set how long the light will remain illuminated upon detecting motion, adding an extra layer of convenience. Meanwhile, the integrated photocell ensures the light only activates at night or in low-light conditions, further optimizing energy usage.

Furthermore, installation of the Heath Zenith 598-1347-00 is user-friendly, allowing homeowners to set it up with minimal hassle. The comprehensive mounting guide included makes it accessible for DIY enthusiasts and professional electricians alike.

In conclusion, the Heath Zenith 598-1347-00 is an excellent choice for those seeking an effective outdoor lighting solution. With its powerful motion detection, energy-efficient LED technology, durable design, and user-friendly features, it serves as a practical addition to any home, enhancing both security and convenience.