PAR Floodlight

Features and Ratings:

• Up to 150 Watt maximum incandescent load or 240 Watt maximum halogen load (up to 75 Watt maximum incandescent,

or 120 Watt maximum halogen, per lampholder).

•Minimal wiring required.

•Install fixture in accordance with local codes.

WARNING: Turn power off at the fuse or circuit breaker.

1.Remove the existing light fixture.

2.Install the mounting strap as shown using two screws that fit your junction box.

Note: The plastic hanger can be used to hold the fixture while wiring. Thread the small end of the plastic hanger through the hole in the center of the cover plate. Insert the small end into one of the slots on the mounting strap.

3.Set the LAMP MODE switch to the desired light turn-on effect (Normal, Soft, Flash).

4.Route the wires from the light receiver through the large gasket holes.

5.Twist the junction box wires and fixture wires together as shown.

Secure with UL approved wire connectors.

6.Align the cover plate and cover plate gasket. Secure with mounting bolt.

7.Push the rubber plug firmly into place.

8.Not intended for waterproof junction boxes. Fixture should be surface mount only. Caulk the wall plate mounting surface with silicone weather sealant.

9.Adjust the lamp holders by loosening the lock nuts. Note: Do not rotate the lamp holders more than 180° from the factory setting.

Caution: To avoid water damage and electrical shock, keep lamp holders 30° below horizontal.

10.Screw incandescent bulb up to rated wattage into module. When screwing in the lamps, do not overtighten.

Caution: Do not exceed the maximum load limits listed above.

11.Check operation. Activate transmitter being used with receiver (see transmitter instructions).Asignal will be sent to the receiver to turn the receiver ON or OFF.

WARNING: Risk of fire. Do not aim the lamps at a combustible surface within 3 ft. (1 m).

Mounting	White to	Black to	Rubber
Strap
	White	Black
			Plug

Gasket Mounting

Bolt

Junction box ground wire to green

ground screw on fixture.

Wiring Floodlight

598-1347-00

598-1347-00 specifications

The Heath Zenith 598-1347-00 is a highly regarded outdoor motion-activated light fixture designed to enhance security and convenience around residential properties. This device combines practicality with advanced technology to address the needs of homeowners seeking efficient lighting solutions.

One of the main features of the Heath Zenith 598-1347-00 is its powerful motion sensor, which detects movement within a specified range. The sensor has an adjustable sensitivity setting, allowing users to tailor its responsiveness to their specific environment. This means the light will activate when it detects motion within its coverage area, which significantly improves security by illuminating the surroundings when unexpected movement occurs.

The fixture is also equipped with a state-of-the-art LED light source. LEDs are known for their energy efficiency, consuming less power while providing bright illumination. This characteristic not only reduces electricity bills but also contributes to the longevity of the light fixture itself, as LEDs typically last significantly longer than traditional bulbs. The Heath Zenith 598-1347-00 can provide up to 1200 lumens of brightness, ensuring a well-lit area for enhanced visibility at night.

In terms of design, the Heath Zenith 598-1347-00 boasts a rugged and weather-resistant construction, making it suitable for various outdoor settings. It is designed to withstand the elements, with a durable housing that protects the internal components from moisture and corrosion. This ensures the fixture will maintain its functionality over time, regardless of the weather conditions it faces.

Another notable characteristic of this outdoor light is the adjustable timer and photocell feature. The timer allows homeowners to set how long the light will remain illuminated upon detecting motion, adding an extra layer of convenience. Meanwhile, the integrated photocell ensures the light only activates at night or in low-light conditions, further optimizing energy usage.

Furthermore, installation of the Heath Zenith 598-1347-00 is user-friendly, allowing homeowners to set it up with minimal hassle. The comprehensive mounting guide included makes it accessible for DIY enthusiasts and professional electricians alike.

In conclusion, the Heath Zenith 598-1347-00 is an excellent choice for those seeking an effective outdoor lighting solution. With its powerful motion detection, energy-efficient LED technology, durable design, and user-friendly features, it serves as a practical addition to any home, enhancing both security and convenience.