Heath Zenith 598-1347-00 Motion Sensors, Select Night or 24 Hour Mode, Installing Batteries

Page 3

180° and 240° Motion Sensors

180° Motion Sensor

240° Motion Sensor

Features:

•No wiring required.

•Up to 70 feet sensing range, 180° or 240° Coverage (Depending upon model).

•Adjustable sensitivity.

•Day/Night or Night only operation.

•Test mode.

•DualBrite® Mode (240° Motion Sensor Only).

•Uses 2 AA batteries.

•Wall or eave mount.

•Controls receivers up to 100 feet (30 m) away.

Select Night or 24 Hour Mode

These motion sensors are able to detect motion day and night or night only. To set the detection mode, remove battery compartment cover by sliding the cover down. Remove batteries if necessary. Slide the DETECT switch to either the DAY/NIGHT or NIGHT ONLY position. Replace battery compartment cover by reversing the above instructions.

Installing Batteries

•Before mounting motion sensor, remove battery compartment cover by sliding the cover down.

Install 2 AA batteries according to polarity markings inside the battery compartment. Replace battery compartment cover by reversing the above instructions.

 

Installing Motion Sensor

 

1.

Install motion sensor mounting bracket where motion detection is

 

 

desired. Attach motion sensor mounting bracket to a sturdy object

 

 

(i.e. tree, post, house, etc.) using two screws provided. Make

 

 

sure unit has an unobstructed view. Note: Attach mounting

 

 

bracket vertically if connecting to a curved surface such as a

ENGLISH

 

post.

2.

Install motion sensor to mounting bracket. Using a Philips-head

 

screwdriver, loosen the clamp screw on the mounting bracket. Insert swivel ball mount on motion sensor into mounting bracket socket (Note:You should hear a snap).Aim motion sensor toward area where detection is desired. Tighten clamp screw.

IMPORTANT: The motion sensor must be mounted with the bottom cover facing down in order to maintain water tightness.

 

Mounting Bracket

Mounting

 

Bracket Socket

Mounting Screw

Nut

Clamp

Screw

Swivel Ball Mount

Sensor

Installing Motion Sensor

(180° Motion Sensor Shown)

Detect

Control

DAY NIGHT

NIGHT ONLY

 

 

 

 

 

 

1 2 3 4

 

DETECT

CODES

 

 

CODES DETECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2 3 4

DAY

NIGHT

NIGHT

ONLY

180° Motion Sensor

240° Motion Sensor

(Rear View)

(Rear View)

Battery Compartment

598-1347-00

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Example 2 Code Settings, System FeaturesCode Settings Example 1 Code Settings, SystemCode Code Switch LocationsCode Switches Motion Sensor240 Motion Sensors Select Night or 24 Hour ModeInstalling Batteries Installing Motion SensorMotion Sensor Only Check Operation and AdjustmentDualBrite Dimmer Control Motion Sensor Controls180 Motion Sensor Motion Sensor Coverage Area240 Halogen FloodLight Bulb Installation and ReplacementReceiver Information Indoor Plug-In ConverterWhite InstallationJunction box ground wire to green Ground screw on fixture Wiring FloodlightPAR Floodlight Regulatory Information Troubleshooting GuideTechnical Service No Service Parts Available for this ProductTWO Year Limited Warranty Grupo a Grupo B Indica la posición del interruptor Calibraciones DEL CódigoEjemplo 1 Calibraciones del código, sistema Calibración de fábricaConvertidor enchufable para usarse bajo techo Ubicaciones DE LOS Interruptores DE Circuito ImpresoInterruptores De circuito Impreso Detector de movimiento deInstalación del Detector de Movimiento Detectores DE Movimiento DE 180 YSeleccione modo nocturno o modo de 24 horas Instalación de las bateríasSólo Detector de Movimiento de Revisión de la operación y de la regulaciónControl DualBrite de reducción de intensidad Controles del Detector de Movimiento deSensibilidad del Detector de Movimiento 180Área de Cobertura del Detector de Movimiento de MovimientoMovimientoInstalación y Cambio de la Bombilla Información DEL ReceptorConvertidor enchufable para Usarse bajo techo Faro halógenoCableado del reflector InstalacionFaro Par No hay piezas de servicio disponibles para este producto Guía de Análisis de AveríasServicio Técnico Información RegulatoriaGarantía Limitada a 2 Años Exemple 2 Réglage des codes, système CaractéristiquesRéglage DES Codes Du guide de référenceEmplacement DES MICRO-INTERRUPTEURS Détecteur de mouvement surConvertisseur enfichable intérieur Détecteurs DE Mouvement SUR 180 ET Installation Du Détecteur De MouvementSélection du mode de nuit ou du mode 24 heures Installation des pilesDétecteur de mouvement sur 240 seulement Commandes du détecteur de mouvement surVérification du fonctionnement et du réglage Gradateur DualBriteMDRéglage de la couverture du détecteur de mouvement Zone de couverture du détecteur de mouvement surMouvementMouvement DétecteurDétecteur Sensibilité du détecteur de mouvementConvertisseur enfichable intérieur Installation et Remplacement de la LampeEmplacements des commandes Informations SUR LE RécepteurBlanc à Noir à noir BlancCâblage du projecteur Projecteur PAR Aucune pièce de rechange n’est disponible pour ce produit Service TechniqueGuide DE Dépannage Renseignements de règlementsGarantie Limitée DE 2 ANS Is nça fra 598-1347-00

598-1347-00 specifications

The Heath Zenith 598-1347-00 is a highly regarded outdoor motion-activated light fixture designed to enhance security and convenience around residential properties. This device combines practicality with advanced technology to address the needs of homeowners seeking efficient lighting solutions.

One of the main features of the Heath Zenith 598-1347-00 is its powerful motion sensor, which detects movement within a specified range. The sensor has an adjustable sensitivity setting, allowing users to tailor its responsiveness to their specific environment. This means the light will activate when it detects motion within its coverage area, which significantly improves security by illuminating the surroundings when unexpected movement occurs.

The fixture is also equipped with a state-of-the-art LED light source. LEDs are known for their energy efficiency, consuming less power while providing bright illumination. This characteristic not only reduces electricity bills but also contributes to the longevity of the light fixture itself, as LEDs typically last significantly longer than traditional bulbs. The Heath Zenith 598-1347-00 can provide up to 1200 lumens of brightness, ensuring a well-lit area for enhanced visibility at night.

In terms of design, the Heath Zenith 598-1347-00 boasts a rugged and weather-resistant construction, making it suitable for various outdoor settings. It is designed to withstand the elements, with a durable housing that protects the internal components from moisture and corrosion. This ensures the fixture will maintain its functionality over time, regardless of the weather conditions it faces.

Another notable characteristic of this outdoor light is the adjustable timer and photocell feature. The timer allows homeowners to set how long the light will remain illuminated upon detecting motion, adding an extra layer of convenience. Meanwhile, the integrated photocell ensures the light only activates at night or in low-light conditions, further optimizing energy usage.

Furthermore, installation of the Heath Zenith 598-1347-00 is user-friendly, allowing homeowners to set it up with minimal hassle. The comprehensive mounting guide included makes it accessible for DIY enthusiasts and professional electricians alike.

In conclusion, the Heath Zenith 598-1347-00 is an excellent choice for those seeking an effective outdoor lighting solution. With its powerful motion detection, energy-efficient LED technology, durable design, and user-friendly features, it serves as a practical addition to any home, enhancing both security and convenience.
Top Page Image Contents