Pelco IS210 manual Description, Parts List

Page 6

Description

The IS210 Series Camclosure® is a wedge-style integrated camera system that is quick and easy to install. The system is designed to mount directly to a wall or ceiling, or to a corner with the IS210-CM corner mount.

The IS210 system is shipped fully assembled. System components include a cover, base with camera and lens, and a mounting plate (refer to Figure 1).

PARTS LIST

Qty Description

1Camclosure integrated camera system

1Hole plug

1Hollow screwdriver bit (1/8-inch)

COVER

BASE

MOUNTING PLATE

Figure 1. Exploded View of System Components

6	C3428M-A (1/08)

Image 6

Contents IS210 Series Camclosure Page Contents Important Safety Instructions Regulatory Notices Radio and Television InterferenceParts List DescriptionInstallation Prepare Mounting SurfaceFixed Mounting Pattern Install Base Without ConduitWith Conduit Removing the Wiring Plug Removing the Conduit Cover Reinstall Camera Module Adjust PositionReplace Cover SW4-1 Automatic Gain Control DN/CH Series AdjustmentsSwitch Settings SW4-2 Backlight CompensationSW4-4 Flickerless Auto Iris Level AdjustmentVertical Phase Adjustment SW4-5 Auto White Balance/Manual White BalanceAdjusting Vertical Phase Blemish DetectionDAY/NIGHT Operation SW1-2 Line Sync DW/CW Series Wide Dynamic Range AdjustmentsSW1-1 Video Format SW1-3 Interlaced Scanning/Progressive ScanningSW1-6 General WDR/Maximum WDR SW1-4 Auto White Balance/Manual White BalanceSW1-5 Fluorescent/General SW1-7 Digital Slow ShutterSW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Service Connector Attaching the 2.5 mm Monaural Headphone PlugSpecifications GeneralProduct Warranty and Return Information ISO9001