Pelco IS210 manual Fixed Mounting Pattern

Page 8

FIXED MOUNTING

PATTERN

Figure 3. Fixed Mounting Pattern

ADJUSTABLE

MOUNTING

PATTERN

Figure 4. Adjustable Mounting Pattern

8

C3428M-A (1/08)

Image 8
Contents IS210 Series Camclosure Page Contents Important Safety Instructions Regulatory Notices Radio and Television InterferenceParts List DescriptionInstallation Prepare Mounting SurfaceFixed Mounting Pattern With Conduit Install BaseWithout Conduit Removing the Wiring Plug Removing the Conduit Cover Replace Cover Reinstall Camera ModuleAdjust Position DN/CH Series Adjustments Switch SettingsSW4-1 Automatic Gain Control SW4-2 Backlight CompensationAuto Iris Level Adjustment Vertical Phase AdjustmentSW4-4 Flickerless SW4-5 Auto White Balance/Manual White BalanceAdjusting Vertical Phase Blemish DetectionDAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments SW1-1 Video FormatSW1-2 Line Sync SW1-3 Interlaced Scanning/Progressive ScanningSW1-4 Auto White Balance/Manual White Balance SW1-5 Fluorescent/GeneralSW1-6 General WDR/Maximum WDR SW1-7 Digital Slow ShutterSW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Service Connector Attaching the 2.5 mm Monaural Headphone PlugSpecifications GeneralProduct Warranty and Return Information ISO9001