Pelco C3425M-D manual Deep Electrical Box Installation

5. Connect the power wires.

Voltage	Red Wire	Black Wire
12 VDC	+	Ground
24 VAC	~	~

AC operation only: If you are wiring more than one Camclosure to the same transformer, connect one side of the transformer to the red wire on all units; connect the other side of the transformer to the black wire on all units.

NOTE: Failure to connect all AC powered units the same way will cause the cameras to be out of phase with each other and may produce a vertical roll when switching between cameras.

6. Attach the back box to the adapter plate with two supplied 8-32 x 0.75-inch Phillips pan head self- tapping screws.

4S DEEP ELECTRICAL BOX

CEILING/

WALL

8-32 X 1.00-INCH	ADAPTER PLATE
	(SUPPLIED)
PHILLIPS PAN
HEAD SCREWS
(SUPPLIED)
8-32 X 0.75-INCH	BACK
PHILLIPS PAN
	BOX
HEAD SCREWS
(SUPPLIED)

Figure 10. 4S Deep Electrical Box Installation

16 C3425M-D (8/08)