Pelco C3425M-D manual Camera Positioning, Positioning the Camera

Page 26

Camera Positioning

Rotate and tilt the camera module to position the camera.

NOTE: Do not over-rotate the module. Excessively turning the module in one direction could result in damage to the wiring.


ìTilt 140° (20°–160°)	îPan 360°	ïRotation 360°

Figure 16. Positioning the Camera

26	C3425M-D (8/08)

Image 26

Contents IS90 Series Camclosure Contents List of Illustrations Regulatory Notices Radio and Television InterferenceDescription ModelsParts List IS90B-DNV9 IS90B-DNV9XShown Actual Size Remove the Bubble Removing the BubbleUnshielded Twisted Pair UTP Video InstallationSurface Installation CEILING/WALL Ceiling/Wall Installation IN-CEILING Installation Suspended Ceiling Removing the Surface Mount Ring from the Back BoxCeiling Tile Installation with Surface Mount Ring IN-CEILING Installation Fixed CEILING/WALL Pinch the sidesSurface Installation 4S Standard Electrical BOX In-Ceiling Installation to a Fixed Ceiling/WallIN-CEILING Installation 4S Deep Electrical BOX Standard Electrical Box InstallationDeep Electrical Box Installation Camera Adjustments Varifocal Lens Zoom and Focus AdjustmentsDN/CH/C Series Adjustments Switch SettingsAuto Iris Level Adjustment Vertical Phase Adjustment DAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments SW1-2 Line SyncSW1-4 AWB Auto White Balance/MWB Manual White Balance SW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Camera Positioning Positioning the CameraInstall Liner and Bubble Installing the BubbleService Connector Attaching the 2.5 mm Monaural Headphone Plug Specifications GeneralProduct Warranty and Return Information ISO9001