Service Connector
The IS90 Series Camclosure integrated camera system includes a service connector that outputs camera video. Use it at the installation site to set up the field of view and focus the camera.
SERVICE
CONNECTOR
Figure 19. Service Connector
Pelco offers two optional items that plug directly into the service connector. Before using either option, you must remove the bubble.
The optional CST150 has a 3-foot (0.9 m) cable and micro display for viewing camera video. Plug it into the service connector and view the video.
NOTE: The three buttons on the CST150 are not used with the IS90 Series Camclosure.
The optional IS-SC is a 4-foot (1.2 m) cable with a service connector and a BNC connector. Plug the cable into the service connector on the IS90. Then connect the other end to any standard BNC (VIDEO IN) connector on a monitor.
To assemble a longer service cable for the Camclosure integrated camera system, purchase the following from a local electronics supply store:
12.5 mm monaural headphone plug
1CPM 88 miniature coaxial connector
1RG174/U coaxial cable
28 |