Panasonic KX-TD816CE, KX-TD1232CE Basic Operations, Intercom Calls, Enter the extension number

Page 13

Basic Operations

Making Calls

Intercom Calls

Make sure the Power Switch is set to ON (●) and “ ” is displayed.

1

2

INT'

Press (Talk) or (Intercom).

Enter the extension number.

•

The dialed number is displayed.

201

•

If you misdial, press

(Flash) and

enter the number again.

3

Talk after the called party answers.

201

4

Press

C

(Cancel) after the conversa-

tion is finished.

Note: – Predialing is also possible. In this case, reverse steps 1 and 2.

– If you misdial while predialing, press CLR (Clear) to clear each digit from the last one, and enter the number again.

–You can also finish the conversation by placing the PS on the Charger

or pressing (Talk).

–If “ ” flashes, move towards the Cell Station and try again.

Handover: Even if you move during a conversation, the linking CS is automatically switched without disconnecting the call.

Handover is available only during a conversation (except a conference call). It is not available when the switched CS is busy or there is no CS in the moving range.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents KX-TD7500CE Rechargeable Handset Clip Battery AccessoriesIntroduction RF Interface Unit with 4-Station Line KX-TD144Contents Location of Controls Headset Jack Microphone Charge Contacts Charge Indicator Power SwitchBattery strength Radio signals from the Cell StationFully charged Medium Low Battery needs to be charged Fault Installing a Battery Installing the BatteriesReplacing a Battery Standard Battery LifeCharging a Battery Registering the PS Initial SettingsSelecting the Display Language Adjusting the Receiver Volume Adjusting the Ringer VolumePress the Volume UP / Down Control button Installing the Handset Clip Intercom Calls Basic OperationsEnter the extension number Talk after the called party answersLine Access, Automatic selects an idle CO line Line Access, Automatic / CO line groupEnter the line access code Outside CallsPress Cancel after the conver Sation Line Access, IndividualPress Flexible CO Redialing Redialing a number in the call logClearing all of the numbers in the call log If the PS is on the Charger Quick Answering If the PS is not on the ChargerIf a headset is connected to the PS Or place the PS on the ChargerRetrieving a call on hold Placing a call on holdPlacing a call on exclusive hold Retrieving a call on exclusive holdCanceling SettingPress Function for 2 seconds PS Dialing Directory Using the DirectoryPBX System Speed Dialing Directory PBX Extension Dialing DirectoryKEY Modify Book Storing from Name to Phone Number Storing Names and Numbers in the PS Dialing DirectoryDigits Press Function Book Storing from Phone Number to NamePress OK OK Press OK OK again Repeatedly until the desired item is To edit an item, pressPress OK OK Edit the number Edit the name. Refer toDialing by selecting the name Dialing Using the DirectoryPS Dialing Directory PBX Extension Dialing DirectoryIntercom Dialing by selecting the entryOr Flexible CO Press Talk IntercomPress Book repeatedly until Desired Delete display Appears Press Function Press BookCombination Table Number of pressing times Entering CharactersSpace KeysFor example, to enter T om Jones Press OK OK Continue with the required opera- tions Key OperationsOther Operations On-Hook Press the Talk or Cancel buttonAccount Code Entry Absent Message CapabilityAlternate Calling Ring/V oice Answering, Direct CO LineCall Forwarding Busy Station Signaling BSSCall Hold, Retrieve Call Pickup, CO Line Call ParkCall Pickup, Directed Call Pickup, GroupCall Transfer to CO Line Call Splitting Call WaitingCall Transfer to Extension ConferenceData Line Security Direct Inward System Access DisaDisplay Call Information Do Not Disturb DNDElectronic Station Lockout External Feature AccessEmergency Call Executive Busy Override ExtensionOne-Touch Dialing PagingOperator Call Pulse to Tone Conversion Paging -ANSWERRedial, Last Number Paging and Transfer Redial, Saved NumberStation Speed Dialing Timed Reminder Station Feature Clear System Speed DialingSuper EXtra Device Port Sxdp Two-Way Recording into Voice Mail† Trunk CO Line Answer From Any Station TafasVoice Mail Integration Voice Mail TransferProgramming Overview PS Programming Items Description PS ProgrammingSetting the Key Tone Level Setting the Keypad Backlight Mode LevelSelecting the Ringer Pattern Level Controling the Directory Lock Level Setting the Quick Answering Mode LevelReturned to their default settings at one Time Default TimeSelecting the Dect System Level Selecting the Standby Display*1 LevelSetting the Guidance Menu Level Canceling the PS Registration LevelThis step is not necessary for clearing settings in memory Make sure the Power Switch is set to onPS Programming Operations Press Function Book 2 timesEnter the same password again Search the PS Password or DectPress OK OK To exit the PS Programming mode Cancel System Lock display. Refer to stepsPS Password = Enable PS Password = Disable PBX Programming Overview PBX ProgrammingPBX Programming Operations Redial Before Requesting HelpBefore Requesting Help Placement Safety InstructionsEnvironment Noise Operating RangePSQX1730ZB K1198KM1128

KX-TD816CE, KX-TD1232CE specifications

Panasonic has long been a key player in the telecommunications sector, and the KX-TD816CE and KX-TD1232CE are two of its noteworthy offerings in the field of business communication systems. Both models are part of Panasonic's robust range of digital hybrid PBX systems, designed to cater to various business needs, from small enterprises to larger organizations.

The KX-TD816CE is designed for small to medium-sized businesses. It can accommodate up to 8 analog lines and 24 extensions, making it a flexible solution for growing companies. This system boasts a multitude of features that enhance communication efficiency, including caller ID, call forwarding, and voicemail capabilities. The KX-TD816CE also incorporates advanced call management features, such as call hold, call transfer, and conferencing, enabling teams to collaborate seamlessly.

The KX-TD1232CE is an expanded version suitable for larger business environments, supporting up to 32 extensions. This scalability is crucial for businesses anticipating future growth. Similar to its counterpart, the KX-TD1232CE comes with a comprehensive array of features including support for digital telephones, doorphone integration, and the ability to implement various telecommunication protocols, ensuring adaptability to different business strategies.

Both systems utilize digital technology to enhance sound clarity and reduce signal loss, making for consistent and reliable communication. They also support a range of Panasonic proprietary features such as Automatic Callback and Call Park, optimizing the user experience. With built-in USB programming capabilities, these systems enable easy maintenance and customization, allowing users to configure settings through a simple interface.

Panasonic's emphasis on reliability and user-friendly operation shines through these models. They are designed to be easily installed and managed while offering extensive documentation and customer support to assist users. Moreover, their compatibility with existing Panasonic digital phones ensures that businesses do not have to invest in new hardware when upgrading their systems.

In summary, the Panasonic KX-TD816CE and KX-TD1232CE represent a blend of advanced technology, flexibility, and scalability, making them exemplary solutions for businesses looking to enhance their communication infrastructure. With their array of features and robust performance, these systems are well-equipped to meet the demands of modern business communication, fostering productivity and collaboration among teams.
Top Page Image Contents