Panasonic KX-TD816CE, KX-TD1232CE user manual PBX Programming Operations

Page 53

PBX Programming

PBX Programming Operations

Make sure the Power Switch is set to ON (●) and “ ” is displayed.

1

2

3

4

5

Press (Function).

Press (Book) 2 times.

•You can also search by pressing

(Next) or (Previous).

Press OK (OK).

Press (Book).

•You can also search by pressing

(Next) or (Previous).

Press OK (OK).

• The INT'

(Intercom) flashes green.

KEY

PROGRAMMING

PS-PROGRAM

PBX-PROGRAM

6

Program the desired PBX Programming

items. For more details, refer to

 

 

Station Programming in the KX-TD816

 

/ KX-TD1232 User Manual.

7

To exit the PBX Programming mode,

press C (Cancel).

 

Note: –The following PS buttons replace the buttons of the proprietary telephone (PT) shown in Station Programming in the KX-TD816 / KX-TD1232 User Manual. Exception: Charge Fee Reference –All Clear;

Use (Book) instead of the NEXT (S3) button in step 4.

PT Button

PS Button

 

 

CLR (S2)

=

CLR

(Clear)

NEXT (S3) =

Not supported.

PREV

=

 

 

(Redial)

STORE

=

 

OK

(OK)

HOLD

=

 

 

(Hold)

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents KX-TD7500CE Rechargeable Handset Clip Battery AccessoriesIntroduction RF Interface Unit with 4-Station Line KX-TD144Contents Location of Controls Headset Jack Microphone Charge Contacts Charge Indicator Power SwitchFully charged Medium Low Battery needs to be charged Radio signals from the Cell StationBattery strength Fault Installing a Battery Installing the BatteriesReplacing a Battery Standard Battery LifeCharging a Battery Selecting the Display Language Initial SettingsRegistering the PS Press the Volume UP / Down Control button Adjusting the Ringer VolumeAdjusting the Receiver Volume Installing the Handset Clip Intercom Calls Basic OperationsEnter the extension number Talk after the called party answersLine Access, Automatic selects an idle CO line Line Access, Automatic / CO line groupEnter the line access code Outside CallsPress Flexible CO Line Access, IndividualPress Cancel after the conver Sation Clearing all of the numbers in the call log Redialing a number in the call logRedialing If the PS is on the Charger Quick Answering If the PS is not on the ChargerIf a headset is connected to the PS Or place the PS on the ChargerRetrieving a call on hold Placing a call on holdPlacing a call on exclusive hold Retrieving a call on exclusive holdPress Function for 2 seconds SettingCanceling PS Dialing Directory Using the DirectoryPBX System Speed Dialing Directory PBX Extension Dialing DirectoryKEY Modify Book Storing from Name to Phone Number Storing Names and Numbers in the PS Dialing DirectoryPress OK OK Press OK OK again Storing from Phone Number to NameDigits Press Function Book Repeatedly until the desired item is To edit an item, pressPress OK OK Edit the number Edit the name. Refer toDialing by selecting the name Dialing Using the DirectoryPS Dialing Directory PBX Extension Dialing DirectoryIntercom Dialing by selecting the entryOr Flexible CO Press Talk IntercomPress Book repeatedly until Desired Delete display Appears Press Function Press BookCombination Table Number of pressing times Entering CharactersSpace KeysFor example, to enter T om Jones Press OK OK Continue with the required opera- tions Key OperationsOther Operations On-Hook Press the Talk or Cancel buttonAccount Code Entry Absent Message CapabilityAlternate Calling Ring/V oice Answering, Direct CO LineCall Hold, Retrieve Busy Station Signaling BSSCall Forwarding Call Pickup, CO Line Call ParkCall Pickup, Directed Call Pickup, GroupCall Transfer to CO Line Call Splitting Call WaitingCall Transfer to Extension ConferenceData Line Security Direct Inward System Access DisaDisplay Call Information Do Not Disturb DNDElectronic Station Lockout External Feature AccessEmergency Call Executive Busy Override ExtensionOperator Call PagingOne-Touch Dialing Pulse to Tone Conversion Paging -ANSWERRedial, Last Number Paging and Transfer Redial, Saved NumberSuper EXtra Device Port Sxdp Station Feature Clear System Speed DialingStation Speed Dialing Timed Reminder Two-Way Recording into Voice Mail† Trunk CO Line Answer From Any Station TafasVoice Mail Integration Voice Mail TransferProgramming Overview PS Programming Items Description PS ProgrammingSelecting the Ringer Pattern Level Setting the Keypad Backlight Mode LevelSetting the Key Tone Level Controling the Directory Lock Level Setting the Quick Answering Mode LevelReturned to their default settings at one Time Default TimeSelecting the Dect System Level Selecting the Standby Display*1 LevelSetting the Guidance Menu Level Canceling the PS Registration LevelThis step is not necessary for clearing settings in memory Make sure the Power Switch is set to onPS Programming Operations Press Function Book 2 timesEnter the same password again Search the PS Password or DectPress OK OK To exit the PS Programming mode Cancel System Lock display. Refer to stepsPS Password = Enable PS Password = Disable PBX Programming Overview PBX ProgrammingPBX Programming Operations Redial Before Requesting HelpBefore Requesting Help Environment Safety InstructionsPlacement Noise Operating RangePSQX1730ZB K1198KM1128

KX-TD816CE, KX-TD1232CE specifications

Panasonic has long been a key player in the telecommunications sector, and the KX-TD816CE and KX-TD1232CE are two of its noteworthy offerings in the field of business communication systems. Both models are part of Panasonic's robust range of digital hybrid PBX systems, designed to cater to various business needs, from small enterprises to larger organizations.

The KX-TD816CE is designed for small to medium-sized businesses. It can accommodate up to 8 analog lines and 24 extensions, making it a flexible solution for growing companies. This system boasts a multitude of features that enhance communication efficiency, including caller ID, call forwarding, and voicemail capabilities. The KX-TD816CE also incorporates advanced call management features, such as call hold, call transfer, and conferencing, enabling teams to collaborate seamlessly.

The KX-TD1232CE is an expanded version suitable for larger business environments, supporting up to 32 extensions. This scalability is crucial for businesses anticipating future growth. Similar to its counterpart, the KX-TD1232CE comes with a comprehensive array of features including support for digital telephones, doorphone integration, and the ability to implement various telecommunication protocols, ensuring adaptability to different business strategies.

Both systems utilize digital technology to enhance sound clarity and reduce signal loss, making for consistent and reliable communication. They also support a range of Panasonic proprietary features such as Automatic Callback and Call Park, optimizing the user experience. With built-in USB programming capabilities, these systems enable easy maintenance and customization, allowing users to configure settings through a simple interface.

Panasonic's emphasis on reliability and user-friendly operation shines through these models. They are designed to be easily installed and managed while offering extensive documentation and customer support to assist users. Moreover, their compatibility with existing Panasonic digital phones ensures that businesses do not have to invest in new hardware when upgrading their systems.

In summary, the Panasonic KX-TD816CE and KX-TD1232CE represent a blend of advanced technology, flexibility, and scalability, making them exemplary solutions for businesses looking to enhance their communication infrastructure. With their array of features and robust performance, these systems are well-equipped to meet the demands of modern business communication, fostering productivity and collaboration among teams.
Top Page Image Contents