Panasonic KX-TD1232CE Installing the Batteries, Installing a Battery, Replacing a Battery

Page 8

Installing the Batteries

You need to charge the battery before initial use and when the bat- tery strength becomes low.

When the battery strength becomes low, “ ” flashes or beep tones sound every five seconds. During a conversation, the call will hang up automatically within three minutes. If idle or in the programming status, “ BATTERY EMPTY” is displayed and the key operation is canceled. In these cases, recharge the battery or replace with a fully charged optional spare battery.

Standard Battery Life

If your Panasonic battery is fully charged [provided 25°C (77°F)]:

While in use (Talk mode)

Up to about 10 hours

 

 

While not in use (Stand-by mode)

Up to about 100 hours

 

 

Note:

–The battery is used while the portable station’s power is ON.

–Battery life may vary depending on usage conditions and ambient tem- perature.

–Please use only a Panasonic battery.

Installing a Battery

1

Hook the bottom of the battery on the portable station, and place the battery in the portable station until you hear a click.

Replacing a Battery

1

Set the Power switch to OFF to prevent

memory loss.

OFF

INT' F1

2

F2

F3

C CLR

While pressing the open-button, remove the battery.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents KX-TD7500CE Accessories Rechargeable Handset Clip BatteryIntroduction RF Interface Unit with 4-Station Line KX-TD144Contents Location of Controls Power Switch Headset Jack Microphone Charge Contacts Charge IndicatorFully charged Medium Low Battery needs to be charged Radio signals from the Cell StationBattery strength Fault Installing the Batteries Installing a BatteryReplacing a Battery Standard Battery LifeCharging a Battery Selecting the Display Language Initial SettingsRegistering the PS Press the Volume UP / Down Control button Adjusting the Ringer VolumeAdjusting the Receiver Volume Installing the Handset Clip Basic Operations Intercom CallsEnter the extension number Talk after the called party answersLine Access, Automatic / CO line group Line Access, Automatic selects an idle CO lineEnter the line access code Outside CallsPress Flexible CO Line Access, IndividualPress Cancel after the conver Sation Clearing all of the numbers in the call log Redialing a number in the call logRedialing If the PS is not on the Charger If the PS is on the Charger Quick AnsweringIf a headset is connected to the PS Or place the PS on the ChargerPlacing a call on hold Retrieving a call on holdPlacing a call on exclusive hold Retrieving a call on exclusive holdPress Function for 2 seconds SettingCanceling Using the Directory PS Dialing DirectoryPBX System Speed Dialing Directory PBX Extension Dialing DirectoryKEY Modify Book Storing Names and Numbers in the PS Dialing Directory Storing from Name to Phone NumberPress OK OK Press OK OK again Storing from Phone Number to NameDigits Press Function Book To edit an item, press Repeatedly until the desired item isEdit the name. Refer to Press OK OK Edit the numberDialing Using the Directory Dialing by selecting the namePS Dialing Directory PBX Extension Dialing DirectoryDialing by selecting the entry IntercomOr Flexible CO Press Talk IntercomPress Function Press Book Press Book repeatedly until Desired Delete display AppearsEntering Characters Combination Table Number of pressing timesSpace KeysFor example, to enter T om Jones Key Operations Press OK OK Continue with the required opera- tionsOn-Hook Press the Talk or Cancel button Other OperationsAbsent Message Capability Account Code EntryAlternate Calling Ring/V oice Answering, Direct CO LineCall Hold, Retrieve Busy Station Signaling BSSCall Forwarding Call Park Call Pickup, CO LineCall Pickup, Directed Call Pickup, GroupCall Splitting Call Waiting Call Transfer to CO LineCall Transfer to Extension ConferenceDirect Inward System Access Disa Data Line SecurityDisplay Call Information Do Not Disturb DNDExternal Feature Access Electronic Station LockoutEmergency Call Executive Busy Override ExtensionOperator Call PagingOne-Touch Dialing Paging -ANSWER Pulse to Tone ConversionRedial, Last Number Paging and Transfer Redial, Saved NumberSuper EXtra Device Port Sxdp Station Feature Clear System Speed DialingStation Speed Dialing Timed Reminder Trunk CO Line Answer From Any Station Tafas Two-Way Recording into Voice Mail†Voice Mail Integration Voice Mail TransferProgramming Overview PS Programming PS Programming Items DescriptionSelecting the Ringer Pattern Level Setting the Keypad Backlight Mode LevelSetting the Key Tone Level Setting the Quick Answering Mode Level Controling the Directory Lock LevelDefault Time Returned to their default settings at one TimeSelecting the Dect System Level Selecting the Standby Display*1 LevelCanceling the PS Registration Level Setting the Guidance Menu LevelMake sure the Power Switch is set to on This step is not necessary for clearing settings in memoryPS Programming Operations Press Function Book 2 timesSearch the PS Password or Dect Enter the same password againPress OK OK To exit the PS Programming mode Cancel System Lock display. Refer to stepsPS Password = Enable PS Password = Disable PBX Programming PBX Programming OverviewPBX Programming Operations Before Requesting Help RedialBefore Requesting Help Environment Safety InstructionsPlacement Operating Range NoisePSQX1730ZB K1198KM1128

KX-TD816CE, KX-TD1232CE specifications

Panasonic has long been a key player in the telecommunications sector, and the KX-TD816CE and KX-TD1232CE are two of its noteworthy offerings in the field of business communication systems. Both models are part of Panasonic's robust range of digital hybrid PBX systems, designed to cater to various business needs, from small enterprises to larger organizations.

The KX-TD816CE is designed for small to medium-sized businesses. It can accommodate up to 8 analog lines and 24 extensions, making it a flexible solution for growing companies. This system boasts a multitude of features that enhance communication efficiency, including caller ID, call forwarding, and voicemail capabilities. The KX-TD816CE also incorporates advanced call management features, such as call hold, call transfer, and conferencing, enabling teams to collaborate seamlessly.

The KX-TD1232CE is an expanded version suitable for larger business environments, supporting up to 32 extensions. This scalability is crucial for businesses anticipating future growth. Similar to its counterpart, the KX-TD1232CE comes with a comprehensive array of features including support for digital telephones, doorphone integration, and the ability to implement various telecommunication protocols, ensuring adaptability to different business strategies.

Both systems utilize digital technology to enhance sound clarity and reduce signal loss, making for consistent and reliable communication. They also support a range of Panasonic proprietary features such as Automatic Callback and Call Park, optimizing the user experience. With built-in USB programming capabilities, these systems enable easy maintenance and customization, allowing users to configure settings through a simple interface.

Panasonic's emphasis on reliability and user-friendly operation shines through these models. They are designed to be easily installed and managed while offering extensive documentation and customer support to assist users. Moreover, their compatibility with existing Panasonic digital phones ensures that businesses do not have to invest in new hardware when upgrading their systems.

In summary, the Panasonic KX-TD816CE and KX-TD1232CE represent a blend of advanced technology, flexibility, and scalability, making them exemplary solutions for businesses looking to enhance their communication infrastructure. With their array of features and robust performance, these systems are well-equipped to meet the demands of modern business communication, fostering productivity and collaboration among teams.
Top Page Image Contents