FOR YOUR SAFETY READ BEFORE OPERATING
7)Turn the manual valve located at the gas inlet of appliance counterclockwise
to “ON”.
8)Turn on all electric power to the appliance.
9)Set thermostat to desired setting.
10)If the appliance will not operate, Follow the instructions “To Turn Off Gas To Appliance” and call your service technician or gas supplier.
To Turn Off Gas To Appliance
1)Set the thermostat to lowest setting.
2)Turn off all electric power to the appliance if service is to be performed.
3) Turn the manual valve at gas inlet of appliance clockwise 
to “OFF”
C A R E & L I M E C O N D I T I O N W A R N I N G
Care of Unit’s Exterior:
Keep the exterior cabinet clean. Use a soft cloth and warm water when cleaning the cabinet. Do Not use volatile substances such as benzene and thinners, as they may ignite, or cause fading of the paint.
Lime Condition Warning Signal:
If you notice “LC” flashing on the remote key pad, this means the unit is beginning to lime up, and MUST be flushed. Contact a qualified Rinnai service technician to flush the appliance. Failure to flush the appliance when “LC” is flashing, will cause damage to the heat exchanger. Damage caused by lime build up is not covered by the unit’s warranty.
www.rinnaiamerica.com | 1 8 | Model 2424WC |