M A I N T E N A N C E & S E R V I C E I N F O R M AT I O N
Warning: Always turn off the electrical power supply, the manual gas valve and the manual water control valve whenever servicing the unit.
The Continuum 2424WC should be checked by a Rinnai Certified Technician once a year. A Rinnai Certified Technician should perform any repairs that may be necessary.
The following items should be checked each inspection:
1)The area around the Continuum 2424WC unit should be free from combustible materials such as cloth, vegetation and building materials. (see page 9)
2)Check burners for presence of foreign debris.
3)Remove and clean the inlet water filter.
4)Keep the appliance area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.
5)Do not obstruct flow of combustion and ventilation air.
In the case of any fault or error message from the Continuum 2424WC, first turn all hot water taps off. Wait for 5 seconds. Turn the hot water tap back on. If this does not correct the fault or eliminate the error message from the remote control, press the priority button on and off twice to reset the system. If the error message still remains, call your Rinnai Authorized Service Representative or Rinnai at
Should overheating occur or the gas supply fail to shutoff, turn off the manual gas control valve to the appliance.
DO NOT ATTEMPT TO SERVICE YOUR Continuum 2424WC YOURSELF. Call a Rinnai Authorized Service Technician or call Rinnai at
www.rinnaiamerica.com | 1 4 | Model 2424WC |