Instruction Manual | Plasma Display Electric |
|
|
IMPORTANT WARNINGS and CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions.
•WARNING: Be aware during the installation that this is a motorized device, and there are pinch points for people and for electrical wiring.
•WARNING: Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted. The lift (without a projector) weighs approximately 150 lbs (68 kg).
•WARNING: Be sure the lift is installed square and parallel in all dimensions to avoid damage to the lift. Avoid stress- ing the unit at any time during installation.
•WARNING: Electrical outlets must be installed by a qualified electrician. Follow all electrical codes.
•CAUTION: Vertical travel adjustment must always be made with the shelf in the middle of travel position and the power switch OFF.
•CAUTION: The unit must always be able to reach its own limit switches and turn itself off.
•CAUTION: Test the unit for shipping damage. See “Inspect and Test the unit before installing,” on page 5.
TOOLS REQUIRED FOR INSTALLATION
•Phillips screwdrivers, No. 1 and No. 2
•Electric drill and 17/64” drill bit
•Socket set with extension
•Allen wrench set
NOTE: Other tools may be required depending on the method of installation.
WEIGHT, SIZE, AND VERTICAL TRAVEL SPECIFICATIONS
See Table 1 on page 3 for the weight, size, and vertical travel specifications of your specific model.
1.Determine size and weight of the equipment to be lifted.
2.Determine the vertical travel height required for presentation viewing.
1
