Instruction Manual | Plasma Display Electric |
CONTENTS |
|
WEIGHT, SIZE, AND VERTICAL |
|
TRAVEL SPECIFICATIONS | 3 |
DIMENSIONAL DRAWING | 4 |
INSPECT AND TEST THE UNIT |
|
BEFORE INSTALLING | 5 |
Inspect The Unit | 5 |
Test The Unit | 5 |
PREPARE THE FURNITURE/CABINET |
|
AND INSTALL THE LIFT | 6 |
General Guidelines | 6 |
Prepare the Furniture/Cabinet | 6 |
Furniture Opening Finish Piece Options | 6 |
Extended Position Finish Piece Option | 6 |
Retracted Position Finish Piece Option | 7 |
Install the PUL into the Cabinet | 9 |
INSTALL THE DISPLAY ON THE LIFT | 10 |
Attach Brackets to the Display | 10 |
Mount the Display | 10 |
ADJUSTMENTS | 11 |
Width Adjustment | 11 |
Adjust Vertical Travel | 11 |
WIRING | 13 |
Pushbutton | 13 |
Extend and Retract Terminals to beTriggered by |
|
Separate Dry Contacts | 13 |
Remote | 15 |
12 Volt Out Supply | 17 |
24 Volt Out Supply | 17 |
Two Dry Contact Closures | 17 |
Low Voltage Sensing | 17 |
TROUBLESHOOTING | 19 |
2
