Stovax F40 Flame Failure Device, ‘Running In’, Ventilation, Installation Details, HOT Surfaces

Page 8

USER INSTRUCTIONS

6.FLAME FAILURE DEVICE

6.1This is a safety feature incorporated in all GAZCO fires, which automatically switches off the gas supply if the pilot light goes out and fails to heat the thermocouple.

7.‘RUNNING IN’

7.1The surface coating on your GAZCO stove will ‘burn off’ during the first 24 hours of operation on high, producing a harmless and temporary odour. If the odour persists ask your Gazco dealer for advice

your retail for advice. 8. SERVICING

12

AR1664

8.1A qualified gas engineer must service the stove every 12 months. In all correspondence, always quote the appliance type and the serial number that may be found on the data

badge on the appliance.

9. VENTILATION

9.1 Any purpose provided ventilation should be checked periodically to ensure that it is free from obstruction.

periodically to ensure that it is free from obstruction.

10. INSTALLATION DETAILS

10.1 To assist in any future correspondence, your installer should have completed the commissioning sheet, this records the essential installation details of this appliance. In all correspondence always quote the model No. and serial No.

11.HOT SURFACES

11.1Parts of this appliance become hot during normal use. It is therefore recommended that a suitable fire guard be used for protection of young children and the infirm. Indeed, all parts of the appliance should be treated as a 'working surface' except for the control touch pad area and access panel.

12.BATTERY REPLACEMENT

12.1Refer to the instructions supplied with the decorative front and remove the front as detailed.

12.2Locate the plastic battery holder situated to the right hand side of the compartment and withdraw.

12.3Replace the batteries ensuring they are in the correct orientation. See diagram 12.

12.4Push the battery holder back into its location and close the door as detailed in the instructions supplied.

FIRE WILL NOT LIGHT

spark only once or

and very slowly?

Does it

twice

 

 

 

 

Does the appliance go

out during use?

 

 

 

 

Does the pilot spark when

using the touch pad?

 

 

 

 

pilot spark when

the handset?

Does the using

 

 

there any spark at the pilot?

Is

 

 

 

YES

YES

 

 

 

YES

Change the handset batteries

NO

 

 

NO NOYES

Is the low battery indicator visible on the handset display?

NO NO

Does pilot light then go out immediately?

Change the appliance batteries

8

Image 8
Contents F40 Avanti Contents GAS Check Appliance Commissioning ChecklistFlue Check Pass Fail User Instructions GeneralLow battery display Hand Set Ensure the Appliance is Cold Before Proceeding Cleaning the F40 AvantiAdvice on Handling and Disposal of Fire Ceramics Fuel BED Arrangement Gazco Flue Sure SystemInstallation Details Battery ReplacementFlame Failure Device ‘RUNNING IN’Packing Checklist Installation InstructionsTechnical Specification Installation of the GAS Suppy Site RequirementsFlue and Chimney Requirements Appliance LocationInstallation of the Stove InstallationSafety Precautions AR1470 Door Replacement Servicing Instructions CommissioningCommissioning Programming the HandsetServicing Chart CheckServicing Requirements Ignition FunctionalFlame Failure Functional Check Fault Finding ChartsIgnition Functional Check Pilot Unit Replacing PartsMain Burner Aeration Plate Magnetic Safety ValveIgnition Lead Control Unit Main InjectorGAS Valve Changing Between GAS Types Butane Spare Parts ListLPG Service Records Page Member of the Stovax Group