Stovax GAZCO Linea Balanced Flue Convector Fire manual Main Injector

Page 20

SERVICING INSTRUCTIONS

REPLACING PARTS

9.3Remove the thermocouple from the rear valve. See diagram 12 Arrow c.

12	C
12

AR1344

9.4Support the valve and remove the magnetic valve retaining nut. See diagram 13.

13

AR1343

9.5Reassemble in reverse order and check for gas leaks.

10.MAIN INJECTOR

10.1Remove the lower cover. See diagram 6.

10.2Remove the glass frame. See diagram 14 arrow C.

14

C

C

C

C

C

C

C

C

C

AR1338

10.3Remove the main burner as described in section 2.

10.4Remove the locknut from the injector. See diagram 15.

15

AR1345

10.5Remove the feed pipe from the gas valve. See diagram 16 arrow C.

16

C

AR1343

10.6Remove the feed pipe with the injector attached from the appliance. Note the orientation of the injector on the pipe.

10.7Reassemble in reverse order and check for gas leaks.

20

Image 20

Contents Linea Contents GAS Check Appliance Commissioning ChecklistFlue Check Pass Fail Lighting the Linea with Hand SET User InstructionsGeneral To set the room temperature Cleaning the LineaUser Instruction Battery Replacement Fire will not LightPacking Checklist Installation InstructionsTechnical Specification Site Requirements Flue and Chimney RequirementsGAS Supply Appliance LocationMinimum Height of Flue from Floor Level Vetro / Plano Installation of the Appliance InstallationSafety Precautions Do not Over TIGHTEN. do not Deform the Rear of the Appliance Commissioning Have YOU Purged the GAS SUPPLY?Servicing Requirements Servicing / Fault Finding ChartsServicing Instructions Ignition Functional Check Flame Failure Functional CheckReplacing Parts Main BurnerPilot Unit Pilot BurnerThermocouple Pilot InjectorElectrode Magnetic Safety Valve Ignition LeadMain Injector Control BOX GAS ValveControl Bracket Assembly Changing Between GAS TypesShort Spares List ButaneService Records Member of the Stovax Group