Stovax GAZCO Linea Balanced Flue Convector Fire Site Requirements, Flue and Chimney Requirements

Page 9

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

1. FLUE AND CHIMNEY REQUIREMENTS

NOTE: This appliance can only be installed in conjunction with the flue supplied.

1.1The flue must be sited in accordance with BS5440: Part 1 (latest edition). See diagram 1.

1.2Any terminal which is less than 2 metres above any access (level ground, balcony or above a flat roof to which people have access) is to be fitted with a guard.

1.3The flue must be securely fixed and fire precautions followed in accordance with local and national codes of practice.

1.4The horizontal terminal can be reduced in size. See diagram 2.

2

AR0630

1

9

Image 9
Contents Linea Contents Appliance Commissioning Checklist Flue Check Pass FailGAS Check User Instructions GeneralLighting the Linea with Hand SET Cleaning the Linea To set the room temperatureUser Instruction Fire will not Light Battery ReplacementInstallation Instructions Technical SpecificationPacking Checklist Flue and Chimney Requirements Site RequirementsAppliance Location GAS SupplyMinimum Height of Flue from Floor Level Vetro / Plano Installation Safety PrecautionsInstallation of the Appliance Do not Over TIGHTEN. do not Deform the Rear of the Appliance Have YOU Purged the GAS SUPPLY? CommissioningServicing / Fault Finding Charts Servicing InstructionsServicing Requirements Flame Failure Functional Check Ignition Functional CheckMain Burner Replacing PartsPilot Unit Pilot BurnerPilot Injector ElectrodeThermocouple Ignition Lead Magnetic Safety ValveMain Injector GAS Valve Control BOXChanging Between GAS Types Control Bracket AssemblyButane Short Spares ListService Records Member of the Stovax Group