Stovax Open Log Burning Convector Fireboxes manual Additional Ventilation

Page 18

PRE-INSTALLATION CHECKS

2. ADDITIONAL VENTILATION

2.1Open appliances require additional ventilation to comply with the requirements of the Building Regulations. This should be provided using a permanently open air vent, of the size listed, which is positioned so that it is not liable to be blocked both inside and outside the building.

2.2Extractor fans or cooker hoods should not be placed in the same room or space as the appliance.

2.3If any of these checks reveal problems do not proceed with the fitting of the appliance until they have been rectified.

Model

 

 

 

 

 

 

 

 

16" Riva Open

22" Riva Open

24" Riva Open

26" Riva Open

28" Riva Open

 

 

 

 

 

 

 

 

mm2

14400

16538

19215

21735

21735

Additional Ventilation

cm2

144

165

192

217

217

 

in2

22.32

25.63

29.78

33.69

33.69

 

 

 

 

 

 

 

 

 

18

Image 18
Contents Riva Open Log Burning Convector Fireboxes 16, 22, 24, 26 & 28 Standard and Low modelsInstallation Installation InstructionsPRE-INSTALLATION Commissioning Maintenance & ServicingDealer appliance was purchased from Appliance Commissioning ChecklistInstallation Engineer Essential information Must be completedSerial Number User InstructionsGeneral Points AIR ControlsDo not touch the paint during the first period of use Using the Appliance for the First TimeRecommended Fuels Wood LogsLighting the appliance Running The applianceBurning tips Fuel Quality WoodFuel Quality Solid Fuel ASH Removal Chimney fire General CleaningOVER-FIRING Extended burningCare of stove Troubleshooting tipsChimney Sweeping Seasonal usePacking List Technical SpecificationSTANDARD FEATURES ModelRiva Open Dimensions LowRiva Open Dimensions Profil Arts STEEL8700 Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K SITE REQUIREMENTSFlue or Chimney Flue PlateMinimum dimensions Hearth Flue Outlet PositionsLow Lintel Builders openingStandard Height Fire surround clearancesPRE-INSTALLATION Checks VentilationAdditional Ventilation Installation Instructions Installing the ApplianceLegal requirements 2a. Fitting of Fuel kits log 2b. Fitting of Fuel kits multi-fuelFitting of Frames Brass or Brushed Steel Profil FramesArts Frames Steel Square/Rectangular Frames 3A. Removable bottom Frame plate Installing Solid fuel cast iron Convector Fitting an optional flue GatherFitting Of Optional Flue Gather Damper arm adjustment Fitting and Removal of Flue DamperFitting and removal of Traditional sparkguard Fitting and removal of Contemporary steel frame SparkguardCommissioning CommissioningAnnual Service Page Service Records