Stovax Open Log Burning Convector Fireboxes manual 2a. Fitting of Fuel kits log

Page 20

INSTALLATION INSTRUCTIONS

3

PR8079

2a. Fitting of Fuel kits - log

2.1Install the relevant fuel box.

4

PR8080

2.2Fit the Log Retainer (Holyrood, Castle, Portcullis), Diagram 5.

Note: the Holyrood retainer has a specially curved log- burning tray.

5

Back of Log

Retainer

Retaining clips

PR8081

Fit retaining clips over the front lip of Log Box

2.3Fit the Contemporary Log Box, Diagram 6

• Lift over frame

6

PR8073

2.4Fit the Contemporary Log Bar, Diagram 7

• Slide into channels in front of the logbox

The removable frame plate is not shown for clarity but must be in place before the Log Bar is fitted, See Section 3A.

7

PR8082

2b. Fitting of Fuel kits - multi-fuel

2.5Slide the Cast Basket and Ashpan on to the base plate, diagram 8

8

PR8083

20

Image 20
Contents Riva Open Log Burning Convector Fireboxes 16, 22, 24, 26 & 28 Standard and Low modelsInstallation Instructions PRE-INSTALLATIONInstallation Commissioning Maintenance & ServicingAppliance Commissioning Checklist Installation EngineerDealer appliance was purchased from Essential information Must be completedUser Instructions General PointsSerial Number AIR ControlsUsing the Appliance for the First Time Recommended FuelsDo not touch the paint during the first period of use Wood LogsLighting the appliance Running The applianceFuel Quality Solid Fuel Burning tipsFuel Quality Wood ASH Removal General Cleaning OVER-FIRINGChimney fire Extended burningTroubleshooting tips Chimney SweepingCare of stove Seasonal useTechnical Specification STANDARD FEATURESPacking List ModelRiva Open Dimensions Low8700 Riva Open Dimensions Profil ArtsSTEEL SITE REQUIREMENTS Flue or ChimneyMax. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue PlateMinimum dimensions Hearth Flue Outlet PositionsBuilders opening Standard HeightLow Lintel Fire surround clearancesPRE-INSTALLATION Checks VentilationAdditional Ventilation Legal requirements Installation InstructionsInstalling the Appliance 2a. Fitting of Fuel kits log 2b. Fitting of Fuel kits multi-fuelArts Frames Fitting of FramesBrass or Brushed Steel Profil Frames Steel Square/Rectangular Frames 3A. Removable bottom Frame plate Fitting Of Optional Flue Gather Installing Solid fuel cast iron ConvectorFitting an optional flue Gather Damper arm adjustment Fitting and Removal of Flue DamperFitting and removal of Traditional sparkguard Fitting and removal of Contemporary steel frame SparkguardCommissioning CommissioningAnnual Service Page Service Records