INSTALLATION INSTRUCTIONS
8.Fitting and removal of Traditional sparkguard
| 16" | 22" | 24" | 26" | 28" |
|
|
|
|
|
|
Traditional | 8690 | 8691 | 8692 | 8693 | 8694 |
guard |
|
|
|
|
|
Traditional | 8695 | 8696 | 8697 | 8698 | - |
guard |
|
|
|
|
|
|
|
|
|
|
|
33 |
Convector |
box |
channels |
Feet |
PR8095 |
•Fit the sparkguard feet to the frame using fixings supplied The longer side faces the convector box.
•Slide the spark guard feet under the convector box channels
34
Closed
PR8096
•Rotate top clips to locate in behind Convector box flange
•Releasing the sparkguard is the reverse of the above
9.Fitting and removal of Contemporary steel frame
sparkguard
| 16" | 22" | 24" | 26" | 28" |
|
|
|
|
|
|
Contemporary | 8740 | 8741 | - | 8743 | - |
spark guard |
|
|
|
|
|
|
|
|
|
|
|
35 |
|
|
|
| Sparkguard Feet | ||
|
|
|
|
PR8097
•Locate Sparkguard feet behind frame ledge
36
Spring Clips
PR8098
•Line up Spring clips with the internal edges of the frame sides
•Secure in position by pushing on sparkguard handles
37
PR8099
•Adjust the top spring clips with pilers if required
Tighten enough to hold the sparkguard in position and pull open easily.
Removal is the opposite of fitting:
•Pull lightly on the sparkguard handle to release spring clips
•Angle towards you
•Lift the feet clear of the frame ledge
26