Stovax Open Log Burning Convector Fireboxes manual 3A. Removable bottom Frame plate

Page 23

INSTALLATION INSTRUCTIONS

20Air deflector not shown for clarity

PR8090

3A. Removable bottom Frame plate

3A.1 The steel frames have a removable bottom plate to allow easy access to the space below for Ash Removal with a vacuum cleaner nozzle.

Fit the removable bottom frame section by tilting at an angle, Diagram 21

21

Removable Plate

PR8091 - 1

 

• Locate underneath the front side bent tags, Diagram 22

22

Bent

Tag

Side

Ledge

PR8091 - 2

• Rotate horizontally onto the side ledges, See Diagram 23

23

Bent

Tag

PR8091 - 3

The front face of the removable section should touch the rear face of the frame, See Diagram 24

24

Frame

Removable Section

 

 

PR8091 - 4

 

 

The Log Box/Multi-fuel box log bar can then be fitted after the bottom removable section is in place, See Diagram 25

25

PR8091 - 5

23

Image 23
Contents 16, 22, 24, 26 & 28 Standard and Low models Riva Open Log Burning Convector FireboxesCommissioning Maintenance & Servicing Installation InstructionsPRE-INSTALLATION InstallationEssential information Must be completed Appliance Commissioning ChecklistInstallation Engineer Dealer appliance was purchased fromAIR Controls User InstructionsGeneral Points Serial NumberWood Logs Using the Appliance for the First TimeRecommended Fuels Do not touch the paint during the first period of useRunning The appliance Lighting the applianceFuel Quality Solid Fuel Burning tipsFuel Quality Wood ASH Removal Extended burning General CleaningOVER-FIRING Chimney fireSeasonal use Troubleshooting tipsChimney Sweeping Care of stoveModel Technical SpecificationSTANDARD FEATURES Packing ListLow Riva Open Dimensions8700 Riva Open Dimensions Profil ArtsSTEEL Flue Plate SITE REQUIREMENTSFlue or Chimney Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.KFlue Outlet Positions Minimum dimensions HearthFire surround clearances Builders openingStandard Height Low LintelVentilation PRE-INSTALLATION ChecksAdditional Ventilation Legal requirements Installation InstructionsInstalling the Appliance 2b. Fitting of Fuel kits multi-fuel 2a. Fitting of Fuel kits logArts Frames Fitting of FramesBrass or Brushed Steel Profil Frames Steel Square/Rectangular Frames 3A. Removable bottom Frame plate Fitting Of Optional Flue Gather Installing Solid fuel cast iron ConvectorFitting an optional flue Gather Fitting and Removal of Flue Damper Damper arm adjustmentFitting and removal of Contemporary steel frame Sparkguard Fitting and removal of Traditional sparkguardCommissioning CommissioningAnnual Service Page Service Records