Vulcan-Hart GCT12, GCT60, GCT48, GCT24 Troubleshooting, Precautions, Problem Causes / Corrections

Page 8

calling for service, the following information must be available: model number, serial number, and gas type. This information can be found on the main data plate, located on the side of the unit.

PRECAUTIONS

When scraping off heavy deposits of grease or oil from stainless steel equipment, never use ordinary steel scrapers. Particles of ordinary steel may become embedded in, or lodge on, the surface of the stainless steel. These will rust, causing unsightly stains and possible contamination of food. If it is necessary to scrape, use stainless steel, wood, plastic or rubber tools.

TROUBLESHOOTING

PROBLEM

CAUSES / CORRECTIONS

Excessive Valve Handle Temperatures /

Verify that oven door is closed.

Sticking Top Burner Valves

If door is closed properly, call for service.

 

Improper ventilation.

Poor Ignition

Call for service.

Pilot and Burners Will Not Light

Verify that main gas supply is turned on.

 

Verify that burner assembly is properly installed.

 

Call for service.

 

 

NOTES

FORM F38202 Rev. A (07-08)

PRINTED IN THE U.S.A.

- 8 -

Image 8
Contents Vulcan Endurance Series Gas Hot Plates Retain this Manual for Future USEImportant for Your Safety For Your SafetyOptional Field Installable Accessories InstallationInstallation Codes and Standards Caster Equipped HOT PlatesTesting the GAS Supply System LevelingGAS Pressure Regulator GAS ConnectionsCleaning OperationControls Lighting and Shutting Down PilotsMaintenance & Adjustments Problem Causes / Corrections TroubleshootingPrecautions Mode D’INSTALLATION ET Mode D’EMPLOI Mesures DE Sécurité Importantes Mesure DE SécuritéInstallation Description AccessoiresEmplacement DéballageCodes D’INSTALLATION ET Normes Aux États-UnisNivelage Régulateur DE Pression DE GAZBranchement DU GAZ Essais DE LA Canalisation DE GAZCommandes NettoyageAllumage ET Extinction DES Veilleuses Suggestions DE FonctionnementService DE L’ENTRETIEN ET Pièces DE Rechange Entretien ET RéglagesNettoyage DU Revêtement Extérieur Acier InoxydableProblème Causes Possibles RemarquesPrécautions