®
STEP 3 - ASSEMBLING HOUSINGS
Some fans are shipped with the decorative upper and lower housings detached from the fan motor. This step tells you how to attach the hous- ing. If the housing for your fan is al- ready attached to the fan motor, go directly to STEP 4 - ASSEMBLING THE FAN.
1.Fit the upper fan housing on the motor hanger adapter. Make sure
Upper Housing
Notches
Motor Hanger
Adaptor Tab
the tabs in the motor hanger adapter fit into the notches in the upper housing as shown in Fig- ure 3a.
2.Attach the upper fan housing to the motor hanger adapter with three 1/2" screws and lockwash- ers as shown in Figure 3b.
| Motor Hanger |
Upper Fan | Adaptor |
| |
Housing | Acorn Nut |
| Washer |
3.Attach the bottom cover to the upper fan housing with thrubolts and acorn nuts as shown in Fig- ure 3b, or with
Upper Fan
Housing
Bottom Cover | Thrubolt |
Bottom Cover
Figure 3a - Motor Hanger Adapter | Figure 3b - Assembling and Attaching | Figure 3c - Attaching Bottom Cover to |
Tabs and Upper Housing Notches | Housings to Motor Hanger Adapter | Upper Fan Housing |
|
|
|
10